ShiZZZoN's Build #2 The Epicness of 2011-2024

[mccleery3 166]

Just got word yesterday...

My 270XP Alt has just been built..

Awaiting further info..

If they remember, it should be getting anodized too.

That can take up to 1.5weeks.

It just better be installed before Slamology son!!

[shizzzon 461]

But dad!!!... I got so much more work to do...

[mccleery3 166]

That's right!...respect your elders son!!

NOW GET BACK TO WORK!!

[ssh 924]

Maybe daddy should help kiddo.

[Sencheezy 689]

That's right!...respect your elders son!!

NOW GET BACK TO WORK!!

tisk, tisk, tisk, tisk, wop, wop, wop, wop..... done done doneeeeee errrrrr we errrrrrr chica chica POW POW burrrrr burrrr WUUUUUUUUUUUUUUBBBBBBBB CHICA CHICA WUUUUUB ERRR WUBUBUBUBUB UGH ugh ugh ugh ugh wwwweeeeee YO DJ, drop DAT WUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUBBBBBBBBBB

[mccleery3 166]

Maybe daddy should help kiddo.

If he lived closer I'd help.

Senchez=tard

[Sencheezy 689]

Maybe daddy should help kiddo.

If he lived closer I'd help.

Senchez=tard

You not nice to me son

[16K 159]

Senchez=tard

AGREED X2 !!!

waiting for more pics

[shizzzon 461]

progress slowin down due to heat.. when i get full steps accomplished, i'll upload more pics

[16K 159]

progress slowin down due to heat.. when i get full steps accomplished, i'll upload more pics

haha i feel you... ive been slowly getting stuff done too cause of the heat....

[shizzzon 461]

270XP ALTERNATOR HAS SHIPPED!

It will be here next week...

I will not install it until about a week before the show.. No need to right now..

If there is something wrong with it.. oh well, throw the stock on there and make do.

There is just no need to put it on at this time.

[shizzzon 461]

Sorry I havent been as active in this log lately, been gettin mad work done..

My DC Power 270XP alt is in

I have placed order for All Crescendo front stage equipment

I have also ordered 12v cooler

Just ordered 30 fuses and 6 in-line fuse holders for 40 runs

Just ordered almost 300 bolts for all ring terminals and fuses

Just ordered all RCA cables

Sealing wall is 85% complete

Working on bracing wall right now

All powerground blocks are cut, drilled n tapped right now.

Waiting on more aluminum to make the last 4 battery terminals.

Still have to order custom decals and voltmeters and that's it.

Pics will be up in about 10 days.

[shizzzon 461]

Got info about situation-

My headunit does NOT need to be replaced, only all 3 sets of RCAs are damaged so that's good.

All front stage amps were tested and work fine.

DC Power forgot to send me mounting hardware for alt so it's coming now.

Just got off phone with Air Tech, he says the strut is not leaking fast enough to possibly be the strut itself and there is a 90% chance he can diagnose and repair the leak without removing the strut.

Also, i told him what high level of PSI i was using to fill them up to and he told me that's nothing.. don't worry about it.

About to leave to have the suspension diagnosed and will post what is found tonight.

[shizzzon 461]

Air strut still leaking.. I went out there and soap tested every part of the system except for top strut itself and no leaks found yet..

Will be having me and 2 other guys check this thing out from A to Z this saturday to find this damn problem..

Also.. just got off phone with pricing or new brakes and tires..

Brakes = $900

Tires = $700 installed..

Damn car audio about to rape me.

[Infinite913 381]

car audio = fail

Car Video now thats where its at <------ the Grapist!

[shizzzon 461]

HAHAHA! I'm going to tie you to the radiator... And GRAPE YOU!

[16K 159]

[dbsupra 69]

$900 for brakes? What the hell are you getting?

I didn't spend half that on the supra.

[ssh 924]

$900 for brakes? What the hell are you getting?

I didn't spend half that on the supra.

What exactly did you do? I'm guessing he's doing an oversize kit with new rotors and calipers.

[dbsupra 69]

Rotora rotors and porterfield pads.

I could see where a big brake kit would be spendy but I don't know why it would be necessary on his car.

[ssh 924]

Rotora rotors and porterfield pads.

I could see where a big brake kit would be spendy but I don't know why it would be necessary on his car.

The added weight from batteries, amplifiers, subwoofers, bracing, and wood.

[mccleery3 166]

He isn't happy unless he goes stupid over the top with any and everything he does/build. I say he needs to find a buddy that is a mechanic to do the brake work though......he's gettin graped!

[dbsupra 69]

You would be surprised how well real high performance brakes work. EBay rotors and AutoZone pads don't cut it. I know a couple guys running tc's on the track and don't have a BBK.

I told Sean I'd help him with his car but after putting the belt back on at slam I may retract that lol.

[shizzzon 461]

Lol, dave. I need to get ur number because you are def a good experienced guy.

Thanks for posting the last few comments guys, really!

Just got off phone with brake specialist..

All I need is new rotors, lines and pads. That'll cut cost by 50%.

Also, tires are too big.. I'l save a few bucks by dropping to lower width tire.

Once the strut problem is fixed, I'll order this stuff

[dbsupra 69]

If you are getting all that I would go ahead and upgrade and maybe even stainless brake lines. They do help. Or is it already at the shop and they are doing the work already? Hell being that far into it I would drain the fluid and replace it with some motul.

About the tires I think you should get some vogues. That would be mad tite!