ShiZZZoN's Build #2 The Epicness of 2011-2024

[16K 159]

Lets see those guts!

X2

[shizzzon 461]

It's official...

HISTORY IN THE MAKING!

It has just been confirmed that 4 18s WILL fit in the scion tC.

This will be the first wall to ever be built with 4 18s in a scion tC AND the first wall to ever fit 4 18s in a 2door hatchback that I know of.

The subs were test fitted and the baffles have been test fitted inside the wall. Everything is a GO!

The baffles will be attached together tonight and prepare to work on the roof next... I'm getting there!

Pics will come later on this week.

[shizzzon 461]

I forgot to add.. There is VERY little wood mass in this baffle to hold 200lbs of speaker on..

It will need to be reinforced with 2x4 and steel from the inside to support the weight.. Something unexpected but mandatory.

[shizzzon 461]

And a third thing to add- I have MORE VOLUME than expected!!!

I was expecting ~27cuft Gross and ~19cuft NET...

I have 33cuft GROSS and about ~27cuft NET Woohoo!

[KyleBrown 121]

we want pics!

[ricksi30 923]

It's official...

HISTORY IN THE MAKING!

It has just been confirmed that 4 18s WILL fit in the scion tC.

Damn! That will be insane.

[16K 159]

we want pics!

X2 !!!

[Sencheezy 689]

bueno

[mccleery3 166]

It shall destroy all!!!!

[shizzzon 461]

Here is those gut pics of the OPTI500X2 you guys kept raving about-

[trod2902 26]

That board looks nice hehe

[Aaron Clinton 2,372]

Nice opti!

[shizzzon 461]

Ok.. well.. found out i'm not the first person to do 4 18s in a 2door hatch.. BUT.. i am the first person to do it in a scion tC...hehe.

Anyways, more pics-

[Frostedflakejake 148]

Holy clamps Batman!

[shizzzon 461]

[An-i-no 86]

That poor center console wants to kill itself already...

[MikeMartel 64]

Sean you needs some more clamps..

[stevemead08 752]

Port on driverside?

[shizzzon 461]

yep, the official method of obtaining loudest pressure in a USA vehicle.

[stevemead08 752]

I wouldn't say that. I'm .8 db louder in the driver kick. Post on driver side would hurt me.

[shizzzon 461]

You wouldnt know unless u rebuilt.

Most to all Draggers run a 70/30 on the driver side because high pressure(port) moves to low pressure areas(opposite of port).

IE- port horizontally up top, you would do awesome in the kick.

Less restrictions are seen when porting on driver side as there is a steering wheel on the driver side.

There are less restrictions on the passenger side therefore, driver side port it is.

[REVpuggie 23]

You wouldnt know unless u rebuilt.

Most to all Draggers run a 70/30 on the driver side because high pressure(port) moves to low pressure areas(opposite of port).

IE- port horizontally up top, you would do awesome in the kick.

Less restrictions are seen when porting on driver side as there is a steering wheel on the driver side.

There are less restrictions on the passenger side therefore, driver side port it is.

you can't break it all down to a science and knowns !

[shizzzon 461]

Exactly, that's why you wouldnt know unless u rebuild like i mentioned.

But from the years of experience and being around the scene.. that's just how it is. It's common knowledge.

[shizzzon 461]

Just got word yesterday...

My 270XP Alt has just been built..

Awaiting further info..

If they remember, it should be getting anodized too.

That can take up to 1.5weeks.

[Notorious97200 339]

Just finished the reading ! Did not read everything though

that build is ...epic !

Waiting for more pics !!!