How to wire multiple amps per coil

[gibsonm21 1]

I've been looking around most of the forums and the only replies are "I wouldn't do it", but the question is never answered. Is it as simple as strapping two similar amps per coil or is there more to it.

Also, can you put more than two amps per coil. If so, how. Thanks

[Ohjay 116]

Are you trying to wire 4 or more amps to one sub?

[gibsonm21 1]

Yes, I want to know how to do it

[Kanaworm$ 292]

u strap the amps to one coil.

[gibsonm21 1]

Thanks

[RXdriver11 2]

What specific equipment are you trying to do this with?

[djjdnap 78]

that meaning the amps have to be strappable correct,

which really means that the gains are the same?

[RXdriver11 2]

Well you can strap em and run them that way. But you need to make sure you sub wont be wired too low for the amp to handle. And you can also run each amp to each coil, but that would only work if you sub has 4 coils. We need to know the equipment to give you more input.

[Duran 387]

You can do it without a problem, if you have the right equipment and the right know how.