"Monster" v.2 Prototype Due Soon

[Angelboy863 21]

that thing looks sweeeeeeeet.

[kahoproductionz 0]

Forgot to bring the pics over here from the Facebook :

Attached to 15" frame.

If we do make it the shorting rings (three of them) will be aluminum.

that looks KILLER!!!

[sundownz 197]

We are working out the coil details still -- making it longer than the original is going to be challenging for a D1 coil

[focalrock4life 0]

any update to this?

[Julian 641]

looks preeeety tall.

[ford302redneck 15]

Jake, I think you should send me this sub in a 18in and a NS-1 to test.

I'll pay shipping.

[TRP 42]

Looking forward to these!!

[sundownz 197]

The D2 coils are in !

12-layers of fury

[Julian 641]

holy crap

[edouble101 314]

Is it just the photo composition or is that coil REALLY thick!?

Is the driver designed to compliment the NS-1?

[TRP 42]

That is great!!! I think they will need about 2 NS-1 to power this bad boy, and maybe 4 to get it to a full power potential!!! I might be over exaggerating, but these things aren't designated as "monsters" for nothing!!

[sundownz 197]

Is it just the photo composition or is that coil REALLY thick!?

Is the driver designed to compliment the NS-1?

It really is that thick.

[sundownz 197]

D2 is together... specs are closing in on where I want to be -- based on what I got from this D2 I think the D1 coil should be correct out of the gate and that the D2 will be good with a tad bit of tweaking :

D2 Revision 1 Coil Specs with 5-layer Z v.3 spider (Z v.3 uses 4 layers) :

RE : 2.93 ohms (series)

FS: 36.87 Hz

QES: 0.329

QMS: 4.326

QTS: 0.306

LE: 6.53 mH (still a bit high but we'll work on the shorting rings on another prototype to get this down)

VAS: 43.24 L

BL: 28.128 NA

MMS: 383 g

CMS: 48.56 uM/N

SENS: 89.93 dB 1w/1m

BL^2/RE: 270 (goal is 300 or so for this driver... revised coil should do it)

I'll do some beating on it soon... have tons of SA-8s to ship... took a short break to pull specs and post them.

[sundownz 197]

[edouble101 314]

That looks loud as balls!!!

[Tirefryr 1,742]

My God, how do you work in that room with all that paneling? That shit drives me nuts.

[emh9009 199]

That's off the wall. You are going to do some damage with that thing.

[focalrock4life 0]

Is there any idea of pre-orders pricing on the 18"?

[ChevyBoy95 15]

that thing is loud just sitting there, PUT IT ON SOME POWA!

edit: forgot to mention, when i saw the thickness of that coil, my jaw literally dropped, shit is insane.

Edited August 25, 2011 by ChevyBoy95

[REVpuggie 23]

was expected coninuous load on these things mentioned ...

what will these coils take ?

[focalrock4life 0]

Whats going on with this?

[sundownz 197]

I am working on baskets before bringing out a motor this heavy.

[Sir-Lancelot 216]

Looks very nice. Beast.

[sundownz 197]

Is everyone ready for some news about this prototype ?

[Shogen 325]

YES!!!