Jump to content
Sign in to follow this  
t money

come say hello to the new guy, i also have a ?

Recommended Posts

hey guys i'll be ordering my 15 mag shortly and was just wondering how this sub will cmpare to my old 16ov2 and e15a.I am looking for a good sounding sub that will get loud and easily handle my crossfire vr1000d(1000 rms at 12.5 volts).Any help is appreciated.

Share this post


Link to post
Share on other sites

It's going to blow you and them (16Ov2, 15A) out of the water...SQ and SPL wise, provided you have the proper box. :D

It will easily handle the vr1000d, again, provided it's in the proper box. :)

Edited by WeDgE

Share this post


Link to post
Share on other sites

thanks for the response. have you had experience with the 16ov2 or e15a? just wanted a little reassurance been out of bass for months now

Share this post


Link to post
Share on other sites

I've owned a pre-order 15A...which IMO, wasn't all that (sound wise)...looked nice, though.

Share this post


Link to post
Share on other sites

UNBELEIVABLE-52 views and only one person said hello.Not the friendliest bunch of guys over here.Oh well i guess i'll be heading over to a more friendlier forum.bye

Share this post


Link to post
Share on other sites
UNBELEIVABLE-52 views and only one person said hello.Not the friendliest bunch of guys over here.Oh well i guess i'll be heading over to a more friendlier forum.bye

there is a welcome section that I set up just for saying hello after you join, it is the very first section on the board

:D

Share this post


Link to post
Share on other sites

Wow. You judge quickly. You just posted the 28th. This forum doesnt have 10298438443 people. People here are actually very nice in my experience here. Helpful too.

Share this post


Link to post
Share on other sites
thanks for the response. have you had experience with the 16ov2 or e15a? just wanted a little reassurance been out of bass for months now

i used to have two ED120.14s in a sealed box and then went to a 160v.2 ported and sealed. The ED subs are good for a budget but lack the performance that expectations tend to make you believe in.

I switched from the 160v2 to a mag 12, 2nd Gen, and the Mag 12 was noticeably better on SQ and had a slight advantage in SPL. On the mic the two 120.14s sealed it 134.3 off 600rms @42hz or so, the 160v.2 sealed(1.75cu ft) off 900RMS at 47hz hit 136-38db, and the Mag 12 in 1.5cu ft sealed, 1200RMS hit 139-141db. The Mag has a much better low end, but does not have the higher extension the ED subs have so it may be a little different in blending it with the mids. But you'll love the Mag 15. I compared the Mag12 proto i used for a while against 12W7 and thought the W7 wasnt that good compared to the Mag and think its only slightly behind a 13W7. The Mag 15 should be fun. I'll be getting one sometime soon, well after New years.... :huh2:

Share this post


Link to post
Share on other sites

Hey Sabre i wasn't judging anybody here, just was saying that nobody wanted to say hello.Thanks for all the replies and HELLO to everyone on this forum.I sent away for a 15 mag yesterday so you'll be seeing me around here more asking some questions and hopefully giving out some answers as well.Thanks for the warm welcome guys. :rockwoot:

Share this post


Link to post
Share on other sites

good choice. GREAT choice.

Share this post


Link to post
Share on other sites

By all accounts the new D2s are amazing speakers. All user reviews that I have encountered that mention your previous drivers would place the D2 above them.

Oh yes, hello and welcome to the forum.

Share this post


Link to post
Share on other sites

You will love the sub. I do. I had the 15ae before and the mag is better hands down over and over again. Especially with the low end.

Share this post


Link to post
Share on other sites

just wanted to say i got my 15 mag d2 and she's beautiful.Unfortunately i have no camera so i have no pics.My only question is can i run it in my 2.2 cf vented box tuned to 30hz until my 3.7 cf box tuned to 30hz is done? Will the 2.2 box cause any harm to the sub or will i just not get the full potential out of the sub?

Share this post


Link to post
Share on other sites

YOu can try it, but I wouldn't expect it to sound too well. If anything, just seal up the vent and run it sealed until your other enclosure is done.

Share this post


Link to post
Share on other sites
By all accounts the new D2s are amazing speakers. All user reviews that I have encountered that mention your previous drivers would place the D2 above them.

Oh yes, hello and welcome to the forum.

I just noticed that yuo run DLS Iridiums, niiiiiiiiiiiiiice :fing34:

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×