Escalade rim problem

[pitbull239 2]

hey guyz.. i got a big problem, i just put my 26's on my 06 escalade and i have no rubbing at all and good clearance. But my 2 front wheels rub or grind on what it seams like to be the axles when i make left and right turns. its not hitting my fenders or the body of the car, i checked. I have kinda deep dish wheels and it looks like they might be grinding on the back of the face of both rims when i turn. can anybody help or give me advice? if it helps it doesnt do it until i turn about half way left or right

help me please?

[bcst86 5]

maybe some spacers?

[Adrian_D 520]

The rims are too wide or have too much backspacing.

You will either lose turning radius by limiting the turning angle somehow (not sure how the Escalade front axle + steering is) or you will have to add spacers on all wheels. I can't imagine the life of the bearings with such ridiculously sized rims...

[pitbull239 2]

The rims are too wide or have too much backspacing.

You will either lose turning radius by limiting the turning angle somehow (not sure how the Escalade front axle + steering is) or you will have to add spacers on all wheels. I can't imagine the life of the bearings with such ridiculously sized rims...

thankx for responding, what will spacers do for u? or me in this case?

[Adrian_D 520]

They will make the wheels stick out more, moving them away from what they rub on.

Just out of curiosity, how wide are the rims ? And what backspacing ? Stock specs would be perfect for a comparison.

[pmureika 31]

It sounds like they are hitting the upper or lower control arms. Putting spacers in will help stock 20s will solve the problem.

[edouble101 314]

Check out aftermarket Escalade parts there may be components you can buy designed to solve the issue you have. I personally would not use spacers, just my opinion.