vcm ??//

[heckvr4 2]

would a vcm work on my alt ?...

its a 05 f150 with a dual alt bracket/alt form dc power/

my stock alt charges my stock electrical and my dc power charges my sound system batts.

i wanna use 16v batts, charge @ 18.

would a vcm work on my dc power alt ?

[ssh 924]

Not sure if your dc alt is set to 15.5v or 18v, but I'm guessing it's internally regulated? I'd talk to dc about it, first.

[heckvr4 2]

Not sure if your dc alt is set to 15.5v or 18v, but I'm guessing it's internally regulated? I'd talk to dc about it, first.

it currently charges@ 14.4

Edited April 2, 2011 by heckvr4

[ssh 924]

Not sure if your dc alt is set to 15.5v or 18v, but I'm guessing it's internally regulated? I'd talk to dc about it, first.

it currently charges@ 14.4

Ahh, well I would wait until Robbie or someone from DC responds, send it back and have them do it, or wait for further instructions from them about doing it yourself.

[heckvr4 2]

Not sure if your dc alt is set to 15.5v or 18v, but I'm guessing it's internally regulated? I'd talk to dc about it, first.

it currently charges@ 14.4

Ahh, well I would wait until Robbie or someone from DC responds, send it back and have them do it, or wait for further instructions from them about doing it yourself.

wait for dc power ?...

you crazy lol jk...

whoever answers first gets my business,. i guess

[Nathan@XSPower 47]

Yes, that looks like a GM 4 pin oval and the VCM will work on it to allow you to charge a 16V battery set up. One thing though is that with 16V batteries you need to charge around 19.2V.

[manrossdamn 57]

Holy moly O_O 19.2 volts?

That's crazy!

[heckvr4 2]

Yes, that looks like a GM 4 pin oval and the VCM will work on it to allow you to charge a 16V battery set up. One thing though is that with 16V batteries you need to charge around 19.2V.

Nice!

Now i just need to find one.

You guys dont have them in stock yet huh?

[Nathan@XSPower 47]

No, but hopefully soon.

[heckvr4 2]

ok , i was able to find a xs power vcm.

New ! only problem its that it dont have instructuions in how to make it work

on 16v batts ,.

what position do the little switches need to be ? how do i set it up ?//

[heckvr4 2]

Anyone have the instructions for the vcm ?...

i need them !

[Nathan@XSPower 47]

Send an email to me and I will get you the instructions. [email protected]

[heckvr4 2]

EMAIL SENT.

thanks a lot nathan,.

ill be ordering 4-5 more d1600's by the weekend

[heckvr4 2]

ok , got it installed pins 1 and 5 up . pins 2,3,4,6 down.

i can get the vcm in ADJ mode with the dot blinking but i keep pushing up and voltage stays the same, it wont go past 16.7. >?

any ideas ? solutions ?...

i pressed the damn button like 300 times and nothing...

[heckvr4 2]

hard to see ,but 1 and 5 are up , 2,3,4,6 are down.

[Nathan@XSPower 47]

Replied to your other threads and PMs.

[heckvr4 2]

thanks nathan , ill give that a try.