Sub and port placement

[Lschevy 3]

Im starting my build in about a week or so and i narrowed my design down to two options. The first option is to have the sub up firing at the rear deck with a kerfed port(s) firing back or sub up firing at the trunk lid with a kerfed port(s) firing into the cabin. after doing a lot of searching i see a lot that like the sub up port back. The reason i chose these two designs is because i cant do both sub and port back or sub back and port to the side. Which option would yield better results? I also its vehicle dependent but my box will have to be build inside the trunk so moving it around is pretty much out the question

[Adrian_D 520]

Most trunk installs I've seen with good scores are sub and port firing both front or both back.

If you do build it inside the trunk, just seal off everything and fire both sub and port to the front.

[Lschevy 3]

Most trunk installs I've seen with good scores are sub and port firing both front or both back.

If you do build it inside the trunk, just seal off everything and fire both sub and port to the front.

i cant because the seats dont fold down

[emh9009 199]

Most trunk installs I've seen with good scores are sub and port firing both front or both back.

If you do build it inside the trunk, just seal off everything and fire both sub and port to the front.

i cant because the seats dont fold down

Cut that sum-bitch out!

[Lschevy 3]

Lol. What about subs back and ports to the side

[emh9009 199]

"better results"?

I wasn't joking about the rear seat

[Lschevy 3]

Thats not an option its going to be sub ip port back or sub back port to the side

[jonbearsmt 919]

subs back port side worked well in my chicks grand am.....

in town cars i found that sub back and port back sound better... sub up port up ahh deeper but not better