Jump to content
stevew007

drop in test

Recommended Posts

too start off I'm not bashing any products this was just a direct swap.

we started out with this box on a 40.1 @.5 did a 154.9

wmd15s.jpg

then we dropped this in

sundown4500.jpg

and only came up with this

155db.jpg

voltage drop was from 15.2 on the volt meter down to 13.4 on the 40.1

and from 15.2 down to 12.3 on the 4500

there was a nsb90 under the hood with 6 runs of wire to the back batteries they are 110lb data safes.

the 40.1 was giving some crappy wave's on the TL and the sundown hard perfect wave's on every test

we are going to do the 4500 on 16 volts next and see what it will do then

here is a pic of the wave with the 40.1

0227011604.jpg

Edited by stevew007

Share this post


Link to post
Share on other sites

o that is pretty cool to see! and I never really noticed the o-scope on the TL before lol! nice post!

you don't have a clamp meter by any chances do you? so you will be able to find the output of each amp

Share this post


Link to post
Share on other sites

o that is pretty cool to see! and I never really noticed the o-scope on the TL before lol! nice post!

you don't have a clamp meter by any chances do you? so you will be able to find the output of each amp

yeah there is a clamp meter but I always like to see DB gains instead of clamped power gains.but then again thats when i was doing street classes with 1 batt under the hood.

friend of mine also brought up power compression and told me to add more port. so we will see what the future brings with the new vehicle

Share this post


Link to post
Share on other sites

×