triple stack BTL

[BANGS 0]

I am looking at buying two Older 3 magnet BTLs and the guy Im going to buy them from doesnt know if they have the SPL option or the daily option. Ii know that i want the daily option because thats what Im going to use them for so i was wondering if there is an easy way to tell if they have the spl option?

Thanks

[NDMstang65 403]

post a picture

[xLogan225x 5]

post a picture

^That

[BANGS 0]

thanks for the help but i really cant get a picture cause the guy lives far away from me so its not really convenient to go and get a picture and i cant get a picture from him.

I've seen them and i can describe them to you if it helps.

Or can you tell me what to look for.

If it helps I've listened to both of them free air and they sound normal.

Thanks

Edited March 15, 2011 by BANGS

[NDMstang65 403]

Most never had an SPL option if they had cooling.

[BANGS 0]

The cooling option would mean that there are holes cut into the side so that you can see the coil correct?

I currently have a BL and it has the cooling option but the holes on the BTLs are smaller than the cooling holes on the bl. (a little smaller than a dime in size)

what does this mean?

They look like this

http://www.tundrasolutions.com/forums/attachments/audio-and-stereo/40592d1238626802-subwoofer-choice-issues-btl2s.jpg

Thanks for your help guys

Edited March 15, 2011 by BANGS

[NDMstang65 403]

No..

It is axial machine grooves on the inside of the top plate and pole of the motor..

You can not see any of it with the sub together..

[BANGS 0]

ok i get what u mean, i didnt think you could see it without seeing the inside of the motor structure but theres no way i can see the inside of the motor, just what the picture i posted shows, thats not them but they look identical to those if that helps with what you wanted to see when you said post a picture before.

thanks

Edited March 15, 2011 by BANGS

[NDMstang65 403]

Nope..I can't tell anything from that.

Most full cooling motors are not SPL gapped anyhow. If you are buying them used from a guy..odds are you are going to have no issues because he has probably been playing music on them.

[BANGS 0]

well he says that hes used them for comps. but he played music on them in front of me and they sounded fine

[BANGS 0]

Ok I have 1 more question, what would happen if they did have the spl option and I played music on them? would using less watts make a difference?

[NDMstang65 403]

Nope coil would rub out..

Honestly man if it is a full cooling motor it probably does not have a SPL option.

[BANGS 0]

How do you know that it is a "full cooling motor"?

[Duran 387]

How about your friend sends you a picture and you post it here...?

[NDMstang65 403]

Only way you can tell with the soft parts and motor still on it is by looking in the holes in the basket..

You should see grooves in the top of the top plate.

[BANGS 0]

first thanks for all the help. So if i understand correctly if i look through the vent holes in the basket then there should be grooves cut into the motor, im looking on my bl that has the cooling option. what i see is like vertical channels cut into the motor where it surrounds the coil. is this correct?

[Duran 387]

first thanks for all the help. So if i understand correctly if i look through the vent holes in the basket then there should be grooves cut into the motor, im looking on my bl that has the cooling option. what i see is like vertical channels cut into the motor where it surrounds the coil. is this correct?

All of them have vent hole sin the baskets, the grooves you saw are the six axial cooling vents in the motor, you are correct.

[BANGS 0]

o ok im really glad then thanks for the input.

i really appreciate the feed back from everyone and the quick responses.

thank you

one last thing, just because he played music on it and it sounded fine doesn't mean anything?

Edited March 16, 2011 by BANGS

[BANGS 0]

How about your friend sends you a picture and you post it here...?

I thought that it wouldnt help if the soft parts are still on. Or will it?

Edited March 17, 2011 by BANGS

[BANGS 0]

there's one more thing i want to ask sorry to ask so many questions but i want to be sure before i buy them. if they don't have the cooling option and have the SPL option will it be a noticeable difference between the regular gap and the SPL gap? A better way to ask is what is the difference in gap size between the daily and SPL option?

Thanks

[ralstonballa2413 20]

Nope coil would rub out..

Honestly man if it is a full cooling motor it probably does not have a SPL option.

Does that answer your question? The gap is tight causing it to rub when music is played.

[BANGS 0]

no i understand the difference and that it would rub the coil, but would it be noticeable difference to the eye if you were looking at it through the holes in the basket? (to see if it had the SPL option or not)

[Duran 387]

no i understand the difference and that it would rub the coil, but would it be noticeable difference to the eye if you were looking at it through the holes in the basket? (to see if it had the SPL option or not)

Since you don't know what you're looking for, no.

[BANGS 0]

i no to look for the cooling channels but im wondering if the gap is noticeably smaller because i no what a regular gap looks like

[ford302redneck 15]

The cooling option would mean that there are holes cut into the side so that you can see the coil correct?

I currently have a BL and it has the cooling option but the holes on the BTLs are smaller than the cooling holes on the bl. (a little smaller than a dime in size)

what does this mean?

They look like this

http://www.tundrasolutions.com/forums/attachments/audio-and-stereo/40592d1238626802-subwoofer-choice-issues-btl2s.jpg

Thanks for your help guys

Cause the 18 basket is a little different than the rest.

But to answer your last question, I don't think you can tell the gaps if you don't know exactly the difference.

Did you look to see if it had cooling?

And why doesn't the owner of the subs know anything about them?

But if your having this much doubt, maybe you shouldn't buy them of the chance their not exactly the right ones.