Wiring Question

[HawkEye 0]

Hey all.I have a question about wiring subs.I have 2 dual 4 ohm subs.Now I know to wire to 1 ohm i would connect + to + and - to - on each sub then run a wire from the + on one sub to the + on the other and the same thing with the -.Ok here is my question.I just got a different box today.I dont have enough speaker wire to do it the way i mentioned above and plus i would ave to run the wire behind the port and I dont know if that would be ok or not.So what i did was wire each sub to 2 ohm by itself by connecting + + and - - on each sub.SO,when i connect both subs to my amp that way will it still be a 2 ohm load or what will he load be?Thanks

[Sir-Lancelot 216]

If you wire each sub like above and run wire from each sub to each amp terminal you would have a 1 ohm final load because your amp will drop it internally.

[HawkEye 0]

Ok thats what I wanted to know.Thank ya sir!!!