A Suburban A Warhorse and a pair of Double Dees

[onebadmonte 235]

So, most of the parts are in. There's some fabricating that still needs to be figured out, but what the heck. Let's get the show started. Here is a pic of the ride:

2004 Suburban Work Truck Edition. It's white and has a rubber mat instead of carpeting on the floor. The interior, vinyl. 5.3 V8 and it's 4WD.

The main source is a Alpine IVA-NAV-1 with a pair of Concept headrest monitors for the rear passengers. No pics yet

Here is the front stage:

Precision Power 355cs components in q-logic kicks, but wait there's more. o_o Can you guess what these are?

One more pic.

Edited February 9, 2011 by onebadmonte

[Mtopper 23]

no idea what the box is for but it looks like fun

[shizzzon 461]

it's for the bass silly

[Randal Johnson 544]

Those look like the Adaire Extremest 7 inch mid bass drivers ...

[sefugi 166]

[edouble101 314]

AA 7"?

[edouble101 314]

Those look like the Adaire Extremest 7 inch mid bass drivers ...

Did you mean Adire?

[jblcamry 103]

mpyre

[Notorious97200 339]

those must be some Neodym midbass speakers ! AURA ...or something else !

[LDW3RD 0]

Nice Burb.

Lets see dem double dees and that warhorse.

[onebadmonte 235]

mpyre

Bingo!

I'll be doing a semi-active 3-way front stage off a Crescendo 1000c4. Two 6.5s per door behind the factory grills.

[jblcamry 103]

they are fantastic drivers. i have 6 , two in the Camry, two in my office as computer towers. and two spares.

[Kanaworm$ 292]

Tuned in for this one!

Nice choice on the equipment!

[Randal Johnson 544]

Those look like the Adaire Extremest 7 inch mid bass drivers ...

Did you mean Adire?

yes sir thank you ...

mpyre

same XBL2 motors ???

[inkfx 3]

Tuned in for this. I must have a listen when it's complete!!

[mariobjones 5]

Nice set-up!! You have a nice blueprint!!

[Ohjay 116]

Nice equipment there

[Aaron Clinton 2,372]

[manrossdamn 57]

in for epic build!!

[onebadmonte 235]

same XBL2 motors ???

Yep.

Tuned in for this. I must have a listen when it's complete!!

I'll let you know.

[Infinite913 381]

will not be a problem with the WARHORSE! TUNED IN FO SHOW!!!!!!!!!!!!!!!!!!!!!!!

[onebadmonte 235]

Here are a few pics of how I got the components into the q-logic panels.

I didn't have a 4"+ hole saw, so I improvised. I used a smaller saw to cut out the center. I sketched out the profile of the hole I needed to cut, then I scored the plastic with a blade. I used to some pliers to break off the scored pieces of plastic leaving me with a semi-nice large diameter hole.

I decided to make a backing ring to secure the mid to the panel. Here is the ring I cut at work using a CNC plasma cutter.

I am using rivnut style inserts to mount the driver.

Here is the installed product.

More on the way.

[ssh 924]

Looking good

[sefugi 166]

Really like the backing rings and the inserts!!

[Sir-Lancelot 216]

Looking good.

More pics!