recommended box size for two 12 BTL's

[bb6kid 0]

getting two 12inch BTL's fully loaded, dual 2

whats the optimal cubic feet this box should consist of and optimal port size

[Duran 387]

[bb6kid 0]

thats for one tweleve, im looking for the size and port for two

[emh9009 199]

https://ssl.perfora.net/www.ficaraudio.com/sess/utn;jsessionid=154cf6b55d24fca/shopdata/0070_Tech/0070_Speakers/0010_Tech.BTL/product_overview.shopscript

[bb6kid 0]

once again, thats for one twelve, should i just double what they say is good for one?

[emh9009 199]

exactly

[JASON123 1]

Enclosures:
BTL 12 – Ported box we recommend using 1.75-2.5 cubic feet @ 30-35Hz (I personally think that a 32hz tuning is optimal, and has the most output and is still the most musical daily driving). Use 12-16 square inches of vent area per cubic foot of volume.

[Duran 387]

Since you need it for two 12's, double it.

[Hzd Skizzy 27]

Make sure you have an amp that does power at 2 ohms if your getting dual 2's.

[cjackxiii 0]

Should you seperate the subs and have two seperate ports or should the subs occupy the same space with one large port?

And if you use seperate ports should they be next to each other or on seperate sides of the box?

I was also trying to figure out how to calculate the cubic feet in a ported enclosure and my numbers arent syncing with your guys. In the btl cut out sheet I did this (11.5/12) x ([30.75-0.75-0.75]/12) x (13/12) and get 2.53059895833 ft^3 not the 2.45 ft^3 the cut out sheet specifies. In my equation I subtracted .75 two time for both pieces of 3/4 mdf on both sides.

-thanx, jack

Edited January 12, 2011 by OMartinez