electrical info for 2500

[wafsman 0]

so i have decided on getting the sundown 2500 to run a pair of fi q15's and i had some questions about the electrical needed to support this. i was looking at getting a delco alternator that puts out 220 amps max and 110 amps idle, stock is a 110 max, a kinetik 2400 in the back and 0 ga wire for power, ground and big 3. you guys think this will be sufficient? also would a 250 amp fuse be ok, or should i go with a 300 amp fuse?

Edited November 26, 2010 by wafsman

[Robert 9]

That sounds good I would use the 250amp fuse.

[Kanaworm$ 292]

Either the 250 or 300 amp fuse will suffice.

[jmanjr 0]

What battery do you have under the hood? I would replace the one under the hood as well. Sounds like your on the right track though!

[wafsman 0]

thanks for the feedback everyone. battery under the hood is stock.

[sundownz 197]

so i have decided on getting the sundown 2500 to run a pair of fi q15's and i had some questions about the electrical needed to support this. i was looking at getting a delco alternator that puts out 220 amps max and 110 amps idle, stock is a 110 max, a kinetik 2400 in the back and 0 ga wire for power, ground and big 3. you guys think this will be sufficient? also would a 250 amp fuse be ok, or should i go with a 300 amp fuse?

250 fuse is fine -- solid plan.