bl recone help!

[[email protected] 0]

Hey I have a 12" fi bl and I need to recone it I have it all striped down and the basket I sanded all that crap off but I need some advice on how to recone the sub and what I should do thanks for your help

Edited November 10, 2010 by JRAC

[Duran 387]

I removed your duplicate thread.

[Fi Car Audio 64]

Old reconing thread that might help...

http://www.caraudio.com/forums/subwoofers/156059-reconing-you-w-mr-jizm-man-ehron-v-ngs-custom-woofage.html

Recone kits can be ordered off the site under the recones tab.

Thanks,

Scott

[[email protected] 0]

Old reconing thread that might help...

http://www.caraudio.com/forums/subwoofers/156059-reconing-you-w-mr-jizm-man-ehron-v-ngs-custom-woofage.html

Recone kits can be ordered off the site under the recones tab.

Thanks,

Scott

thanks that helped alot but does anyone else know if fi send you the glue to mount all of the stuff back together and if they dont where can i order it or what will work to glue it together? thanks

[[email protected] 0]

I removed your duplicate thread.

lol thanks i posted it via droid so i didnt think it worked the first time

[Duran 387]

Old reconing thread that might help...

http://www.caraudio....om-woofage.html

Recone kits can be ordered off the site under the recones tab.

Thanks,

Scott

thanks that helped alot but does anyone else know if fi send you the glue to mount all of the stuff back together and if they dont where can i order it or what will work to glue it together? thanks

I believe UPS didn't like Fi sending glue with them, a 5-minute epoxy form a hobby shop will work well.

[[email protected] 0]

Old reconing thread that might help...

http://www.caraudio....om-woofage.html

Recone kits can be ordered off the site under the recones tab.

Thanks,

Scott

thanks that helped alot but does anyone else know if fi send you the glue to mount all of the stuff back together and if they dont where can i order it or what will work to glue it together? thanks

I believe UPS didn't like Fi sending glue with them, a 5-minute epoxy form a hobby shop will work well.

Ok and how much pressure would I need to keep on the spider and cone?

[Duran 387]

Some plastic C-clamps will work, let it dry for a few hours

[cheese20323 13]

for a first i recommend 15 minute epoxy....because you can move the sub and everything around if it is not in place.

[Kawonu 0]

I got the glue from Fi when I reconed my BL.

[NDMstang65 403]

You can get a glue kit from us in the accessories section...

I'd highly suggest using 15 minute epoxy on your first recone though. It gives you way more room for error.

[[email protected] 0]

You can get a glue kit from us in the accessories section...

I'd highly suggest using 15 minute epoxy on your first recone though. It gives you way more room for error.

thanks everyone for the help when i get my cone in i will post some pics and see if i need to do anything else to the magent before i put my cone on and i think i might get a 15" instead of the 12" because i got a new car and i can fit a big enough box

[[email protected] 0]

how do you get that black stuff off the screws and then what is it so i can put it back on? so the screws dont move. thanks alot.. i also have pics just in case im not clearly stating what i was talking about please help

Edited November 19, 2010 by JRAC

[Bob345 39]

how do you get that black stuff off the screws and then what is it so i can put it back on? so the screws dont move. thanks alot.. i also have pics just in case im not clearly stating what i was talking about please help

i would use an impact screwdriver, that's what iv seen allot of people use to get those screws lose

[[email protected] 0]

how do you get that black stuff off the screws and then what is it so i can put it back on? so the screws dont move. thanks alot.. i also have pics just in case im not clearly stating what i was talking about please help

i would use an impact screwdriver, that's what iv seen allot of people use to get those screws lose

there some kind of black glue or something so the screws dont vibrate loose what is it so i can replace it thanks

Edited November 19, 2010 by JRAC

[Bob345 39]

how do you get that black stuff off the screws and then what is it so i can put it back on? so the screws dont move. thanks alot.. i also have pics just in case im not clearly stating what i was talking about please help

i would use an impact screwdriver, that's what iv seen allot of people use to get those screws lose

there some kind of black glue or something so the screws dont vibrate loose what is it so i can replace it thanks

Most Likely ca glue

[[email protected] 0]

how do you get that black stuff off the screws and then what is it so i can put it back on? so the screws dont move. thanks alot.. i also have pics just in case im not clearly stating what i was talking about please help

i would use an impact screwdriver, that's what iv seen allot of people use to get those screws lose

there some kind of black glue or something so the screws dont vibrate loose what is it so i can replace it thanks

Most Likely ca glue

so could i just replace it with epoxy, the same kind im going to use for the recone?

[jmanjr 0]

Im sure that would use, I normally use locktite I havnt had a problem using it for years.

[Duran 387]

CA glue is black superglue, epoxy works as well.

[[email protected] 0]

Thanks guys for all the help I will post some pics when I recone it!