Big 3 Help

[Kyle1141 0]

Can someone post some pictures of there big three setup and maybe explain to me on how to do it that would be great thank you!

[sefugi 166]

Check out this thread, I beleive page 6 has a few picks that may help:

[CrazyKenKid 64]

did these pics help on the above link

[ssh 924]

Just adding wire from positive post on battery to output stud on alt, negative stud on battery to chassis ground, chassis ground to engine block.

Hopefully adding a path of less resistance for the alt, battery, and any electronic device with a current draw. Big 3 can help with voltage drop and dimming lights, but don't expect it to suddenly make more power

If your that leery about doing this, post a couple pictures from under your hood and we can point out "what to what"

[Kyle1141 0]

Just adding wire from positive post on battery to output stud on alt, negative stud on battery to chassis ground, chassis ground to engine block.

Hopefully adding a path of less resistance for the alt, battery, and any electronic device with a current draw. Big 3 can help with voltage drop and dimming lights, but don't expect it to suddenly make more power :)Ok thanks man I appricate it I got an audioque 2200 and plan on doing the big three and I got the t1000 vmax charge tank for second battery u think I should be fine oh ya and I'm running a btl 18" and I'll have 0 g wire

If your that leery about doing this, post a couple pictures from under your hood and we can point out "what to what"

[Kyle1141 0]

Ok thanks a lot do you think I'll be ok electrical wise if I have big three and I have a vmax t1000 charge tank for my second battery and I'll be running aq2200 with btl 18'