IA-LI 15" Stats

[ztkraptor 0]

Just got an email back, here is what i got for the 15" LI

Driver---15 Inch

FS --- 27 Hz

Re --- 8 ohm series

Qms---5.03

Qes ---0.67

Qts ----0.59

Mms ----205 g

Cms ---0.15 mm/N

Sd ----810 cm^2

Vas ----137 L

Spl ----87.6

BL -----15.5

X-max ------21mm

Sub Diameter------- 15 1/2 inches

Mounting ---------14 1/8 inches

Mounting Dept -------- 8 inches

Driver Displacement ------ .15 cubic ft.

Power ----------- 600 Wrms / 1200 peak

Should help with some better box design I hope, I'm gonna run some numbers today.

[Kanaworm$ 292]

You will find out that going with the "Recommended" enclosure sizes from IA will work the best!

[w00tah 5]

GMC is correct here.

Kef

[ztkraptor 0]

You will find out that going with the "Recommended" enclosure sizes from IA will work the best!

Yeah, I'm getting insane numbers for optimum box size..lol

16 cubic feet...I ran them like 15 times..

But, I know some people like to have the numbers so I wanted to post them.

Someone could double check my numbers and that would be sweet. Because I wanna get my box built before the driver gets here.

[Kanaworm$ 292]

When I ran my 2 15 Li's I had them in a 6.5ft^3 box tuned to 37hz. It was a very tight accurate sounding bass with great lows.

[ztkraptor 0]

When I ran my 2 15 Li's I had them in a 6.5ft^3 box tuned to 37hz. It was a very tight accurate sounding bass with great lows.

Yeah, I think im going to go with about a 4ft^3 and about 35hz.

I just wanted to try to get optimum box size, and the numbers just suck.

Oh well I think I might just modify port length on the 4 foot box that is given on the site here for one of the Icons

http://www.soundsolutionsaudio.com/index.php/technical/icon-box-designs/icon-15-optimal-ported.html

Hows that look?

[ia2 21]

Just got an email back, here is what i got for the 15" LI

Driver---15 Inch

FS --- 27 Hz

Re --- 8 ohm series

Qms---5.03

Qes ---0.67

Qts ----0.59

Mms ----205 g

Cms ---0.15 mm/N

Sd ----810 cm^2

Vas ----137 L

Spl ----87.6

BL -----15.5

X-max ------21mm

Sub Diameter------- 15 1/2 inches

Mounting ---------14 1/8 inches

Mounting Dept -------- 8 inches

Driver Displacement ------ .15 cubic ft.

Power ----------- 600 Wrms / 1200 peak

Should help with some better box design I hope, I'm gonna run some numbers today.

Do not use the TS parameters to build your box if you plan on plugging those numbers in a box building program. Follow our recommended enclosure sizes.