Bravox audio wattages if running active

[RollinOn23z 1]

I just purchased some bravox cs60cf components and I would like to run them active. I would like to know what is a good rms to give the tweeter and a good rms for the midbass. I have a jl 500/5 that gives 100 rms for front two channels and 25 rms for the back two.

[jcarter1885 995]

I would run the mids on the front two channels and the tweeters on the rear two channels and go from there.

Mids crossed around 80hz on high pass filter (lower or higher depending if they can take it or not or where you want them).

Tweeters crossed around 2,600-3,000hz on up on high pass filter, sometimes with lower power levels you can cross a smidgen lower but it really depends. I would see what the company had them crossed at on the passive crossover that came with it and start in that region.

Hope that helps.