wiring subs?

[pitbull239 2]

this might be a dumb question, but can u wire dual 1.4 ohm speakers to 1ohm or do you just have to wire to .7- if you have to wire to .7 can you explain how to do that please?

[cheese20323 13]

only .7.....Wire in parallel +to+ -To-

[pitbull239 2]

only .7.....Wire in parallel +to+ -To-

so wire the positive on one side to the positive on the other, then the same with the negatives and then run a wire from the positve and one from the negative that goes out. is that correct?

[Duran 387]

You are reading the DCR of the coils, they are D1 speakers.

[Impious 1,476]

You are reading the DCR of the coils, they are D1 speakers.

If it's 1.4ohm/coil, that would be a D2.

[Duran 387]

You are reading the DCR of the coils, they are D1 speakers.

If it's 1.4ohm/coil, that would be a D2.

He said each coil was .7

[Impious 1,476]

You are reading the DCR of the coils, they are D1 speakers.

If it's 1.4ohm/coil, that would be a D2.

He said each coil was .7

No, he asked if you could wire to 1ohm or if the only option was to wire to .7, which for a single sub would mean each coil is 1.4

Learn to read n00b

[slim2fattycake 85]

BOO YA!

[Duran 387]

You are reading the DCR of the coils, they are D1 speakers.

If it's 1.4ohm/coil, that would be a D2.

He said each coil was .7

No, he asked if you could wire to 1ohm or if the only option was to wire to .7, which for a single sub would mean each coil is 1.4

Learn to read n00b

Aww poo. You right Brad