Jump to content
Sign in to follow this  
anthonyvo17

will saz3500 be ok on btl?

Recommended Posts

I have a 18 inch btl on a hifonics 2400 right now but I want to get a saz3500 for 2 15 btl later on but if I get the saz3500 now and put it on the 18 btl wired at 2ohms will the sub be ok?

Share this post


Link to post
Share on other sites

should be just fine.... the amp is rated 1750 @ 2ohms.... will move that BTL very nicely... and give you good room to upgrade into later....

Share this post


Link to post
Share on other sites

Should sound real nice. I would like to put a 3000 on mine but not enough money right now.

Share this post


Link to post
Share on other sites

I have big three but with 4 gauge so I need some 0 gauge wires. 145 amp alternator. Also have a kinetik 2400 in my trunk and a redtop as my starter. 0 gauge street wire amp kit. Later on I'm gonna put two 15 btls on that saz3500 and get a dc alternator

Share this post


Link to post
Share on other sites
  On 9/22/2010 at 7:29 PM, anthonyvo17 said:

I have big three but with 4 gauge so I need some 0 gauge wires. 145 amp alternator. Also have a kinetik 2400 in my trunk and a redtop as my starter. 0 gauge street wire amp kit. Later on I'm gonna put two 15 btls on that saz3500 and get a dc alternator

IMO you don't have the electrical now for a 3500D, they take 300+ amps full tilt. Once you get that squared away you should be fine with it on 2 BTL's. Be careful with putting it on a single BTL.

Edited by dr_boom_2000

Share this post


Link to post
Share on other sites
Sign in to follow this  

×