anyway this will work

[agiletick 0]

is there anyway i can get 6 10's to fit on box thats 30x24 tried using the google sketch and stuff to make box and move around the circles and see but i cant use the program worth a crap lol can anyone help me out here

[ssh 924]

your giving two dimensions, what abut the third?

[agiletick 0]

your giving two dimensions, what abut the third?

third shouldn't matter depth is not a issue just wondering if theres enough area on the top to mount them but it is 24" high if you need it

[stevemead08 752]

Just do some math.

101010

101010

you would need approx 33w and 22 tall but thats the absolute min.

You might be able to stagger the two canter holes down a hair and make it work since you only have 30in wide.

[scottxgtr 9]

negative on the 30x24. which dimension is more flexible, the 30 or the 24? like mentioned, if you bump the 30" to 33" it could work, or the 24" to 28.5". sketchup confirmed

[stevemead08 752]

Good work Scott!

[Tirefryr 1,742]

I had 3 tens in this box and it was less than 30" wide.

[agiletick 0]

Thank you scott that is what i was needing done looks like i have find someone to make me something custom i remeasured and the most i could get was 31 or 26

[///M5 2,833]

The third dimension does matter as there is no golden rule that says that all the drivers have to be all on the same face.