AA chao's ?

[nate132113 1]

all my coils read 3.0ohms is this normal? suppose to be dual 2s

[stevemead08 752]

all my coils read 3.0ohms is this normal? suppose to be dual 2s

How are you reading them? dosent sound right. shouls read like 1.5-1.7 DCR give or take

[nate132113 1]

reading from my DMM

[PHATBOi 38]

Some dmms you have to touch the leads together and whatever it reads subtract from the total I believe. Try touching the lead together an see if you get a 1 ohm reading.

I may completely wrong here, someone correct me if I am.

[nate132113 1]

Some dmms you have to touch the leads together and whatever it reads subtract from the total I believe. Try touching the lead together an see if you get a 1 ohm reading.

I may completely wrong here, someone correct me if I am.

did this and it was 1.7?

[NDMstang65 403]

Your meter is messed up...every single coil has the exact same amount of wire wound on the former..it is impossible to have any more then 1.4-1.5 ohms of DCR.

That is the "standard" D2 DCR.

[cheese20323 13]

Some dmms you have to touch the leads together and whatever it reads subtract from the total I believe. Try touching the lead together an see if you get a 1 ohm reading.

I may completely wrong here, someone correct me if I am.

did this and it was 1.7?

Subtract 1.7 from 3.0 and voila! But yeah you need a new DMM

[nate132113 1]

will try a new DMM

[nate132113 1]

what FI recone kit would work with this sub just in case?

[NDMstang65 403]

You can get a recone for a Chaos..so it is a Chaos and not a Fi sub.

Just let me know if you need it.

[nate132113 1]

You can get a recone for a Chaos..so it is a Chaos and not a Fi sub.

Just let me know if you need it.

sounds good will let u know and thanks

[nate132113 1]

new DMM same reading 3.0 ohms? and whats the best tuning for 2 10's?

[NDMstang65 403]

Put them in..see if they play. Then go from there.

If you bought them new, you aren't holding your tongue right. Regardless as your email said, whatever you do..do NOT wire those things to .5ohm

Any amplifier "manufacturer" that says you can run their amplifiers at .5ohm are completely retarded.