Hello, now to the business at hand.

[CrzyBone 0]

Hi

This i what i'm working with:

2006 Dodge Ram 2500 Diesel Quad Cab

Big 3 upgraded

2- 15" fi BL

2- kicker zx1000.1

3/4" MDF custom center console box with 5.6 cuft of airspace after sub disp, bracing, and port. Would love to have a bigger box, but space is LIMITED.

No divider between subs/ subs share air space

Single Slot Port is 15.5" x 3" and 14.75" long (around 32 hz?)

Subs will be down firing and port will face up.

Definitely SPL

Questions:

1- Are the port dimensions correct for a 32 hz tune? I keep getting different measurements depending on the port calc I use. I think carstereo.com is what I settled on.

2- With the port area only being 46.5 sq in instead of the recommended minimum 67.2, will port noise be a major factor if I flare the ends of my ports?

3- With the port area coming in a little low, will it affect the cooling ability of the subs?

Thanks,

Duke

[Aaron Clinton 2,372]

I would suggest starting a topic in the Fi section for a Fi specific question.

[CrzyBone 0]

I would suggest starting a topic in the Fi section for a Fi specific question.

Will do. Just read somewhere that my first 3 posts had to be here (or something along those lines). Just didn't want to piss anyone off.

[nem 2,019]

Welcome

[sefugi 166]

Welcome!!

[altoncustomtech 773]

Welcome to the forum!

[Randal Johnson 544]

to SSA !!!

[Kanaworm$ 292]

Welcome ....

[Sir-Lancelot 216]

Welcome

[jcarter1885 995]