this look alright?

[Juice0723 0]

ok this might be my final design. I used re calc to get the port length and used the other calc to give me my final specs including displacement.

[Sir-Lancelot 216]

?

right for what?

[Juice0723 0]

Like does it look like a good box lol. Like the port area and do I need to have bracing.

The subs I'm going to be using in this enclosure is two custom 12" subs with DC level 5 soft parts.

I just want it to be a loud daily driver would the 32hz tuning be good?

[sefugi 166]

What about an xtra baffle? Maybe some bracing?

[Juice0723 0]

that's the thing tho. my box dimensions are maxed out right now. and barely got enough volume in the box.

I'm wondering if it will hold up well anyway. I could just put a couple of wooden dowels in there too. Take up some more space tho.

[aimone 4]

double baffle it for sure. if u dunno wut that means, it means double up the front where the subs mount. this adds alot makes it more sturdy. also make sure u use tightbond or a similar wood glue and a gang of screws. predrill the holes first. it should hold up and do pretty good.

32hz is good depending on ur music choice. i have a single 15 in about the same size box tuned at 33ish hz and i listen to mostly rap/hiphop and it sounds good. country,rock,and other genres sound good too. i was told first to tune at 30 for the lows n didnt like it cause it was all lows and higher notes sounded nasty. then was told 40hz cause i listen to mostly rap didnt like it cause it didnt get low enough. so then i used my subs recommended tuning freq. of 33hz and it has a good freq. range.

also u might try sealed. more freq. range. and ur subs should still get loud.

how much power u running?

also the box is a key piece of the puzzle to the outcome of the setup. unless u get a box builder to hook it up u will probably end up trying several configs

[Juice0723 0]

Yea I listen to rap/hiphop and some rock/metal stuff.

I'm running about 4-4600watts rms to the two 12's.

I built many boxes before and had them tuned low and high. Never tried a double baffle tho. I know what it is. I should be able to cut the holes easy right with a jigsaw? Like when there both glued together.

But I may put a little bracing in the box like a couple of wooden dowels. So that should raise the tuning a bit.