Drek75633's 3) 18s in a mustang build! Lots of batts and neo s

[Cthedinger 2]

Drek asked me too post this up for him so here yall go, enjoy!

I've stripped it. Grinded it. And I'm gettin ready to go.

[Cthedinger 2]

[Cthedinger 2]

[Cthedinger 2]

IMG]http://i402.photobucket.com/albums/pp109/Derek3669/DSCN0949.jpg

[Cthedinger 2]

[Cthedinger 2]

Time to man handle my wood. lol

Flexed the birch to the 2x4s. But had a FAIL

[Cthedinger 2]

THE FAIL

The birch wood had so much tension it ripped the screws out of the frame that were holding the 2x4s

Only did it on that one though.

[Cthedinger 2]

Got bored. Needed to get a few things off my mind. So here are some pics

[Cthedinger 2]

[Cthedinger 2]

How are ya'll liking the sides in these pics compared to the previous. I like this better. More space.

[Cthedinger 2]

[Cthedinger 2]

[Cthedinger 2]

[Cthedinger 2]

When did crickets start eating red wasp?

Sanded down. Now time for a beer

[Cthedinger 2]

Numbers and ground poundin earth quakin n shakin machine.

PORT

That's 3 layers on the front baffle.

[Cthedinger 2]

[Cthedinger 2]

[Cthedinger 2]

[Cthedinger 2]

I need more wire.

Changed rca location to passenger side.

Extended a few wires and put in a volt meter.

Got it workin

[Cthedinger 2]

Not even 2 ft from headunit. lol

[Cthedinger 2]

Drill bit slipped. This pic was taken not even 5 seconds after it happened. By the time I walked in the house blood was running down my side because I elevated my hand.

And still workin.

Bundle was so big had to cut for it to fit.

[Drek75633 1]

Ive been into this build for what? 2 months tops? I've been installing since December 09. Pretty good for most work done myself. Thanks for postin up bro.

[Cthedinger 2]

When broke like me. Anything works

[Cthedinger 2]

When overkill is just enough.

[Cthedinger 2]

The test fit didn't fit. Quite a bit of sanding left. FUCK

Cuttin out the fiberglass so the baskets will lay.