18" subaru outback build

[Bob345 39]

big three is done!! it has worked wonders for me! went from 14.2 volts to 14.6! the engine even tuns over faster ! ill try to get some pics up tonight.

[Tony Nelson 8]

my home music system for now.

thats all i got for now

Those some rs-150's or 125's? Did you design projects and xo's? or use someones build?

[Bob345 39]

Ok, so it's been a while since iv updated this build log, but last week I decided to go ported. I just got a email conferming my 2 of 4 4" aeroports have been delivered. I'm not home right Now so no picks till later. The box should be around 7 cubes after port displacement. Guna be tuned to 30 hz. Stay tuned for updates!

[sefugi 166]

Tuned in!!

[Bob345 39]

first 2 of 4 Ports are in! will soon pat a vid and pics

[Bob345 39]

alright, i should have updated this sooner, but anyway here are some pics of the aero ports i have added so far. they are 4" psp aeros and will be tuned to 29 hz. i decided to go with 3 aeros instead of 4 because 3 4" aeros give me almost exactly 16^2 inches of port area and also because the ports will already be cut to length to get a 29 hz tuning ftw!

and just the side project i have been working on during this whole build.first time i have ever used veneer and a wood finish like this. tell me what yo think, ill be putting a build log of my ht system here when its all done.

and for the price, these are some of the most amazing woofers i have ever used

well thats it for now, ill put up some pics of my big 3 as i have not done so yet.

[Robert 9]

good job! that sub is massive!!!!

[Bob345 39]

good job! that sub is massive!!!!

Sure is! Also one of the cleanest subs I have ever heard

[Aaron Clinton 2,372]

[StreetLegal 119]

good work !

[Sir-Lancelot 216]

Looking good man.

That amp kit wore was a joke. Someone brought one of those kits to the house the other day. I didnt want to hate on his 4ga but damn.

My 12ga wire for the mids and highs had more copper in it. lol

[Bob345 39]

Looking good man.

That amp kit wore was a joke. Someone brought one of those kits to the house the other day. I didnt want to hate on his 4ga but damn.

My 12ga wire for the mids and highs had more copper in it. lol

Lol same here my speaker wire has 3x as much copper, and the kit was actualy cca! Lol!!

[pdubb 5]

I always liked carpet.

Paint can be so shiny !

I hope you planned some window tint ? Be careful:peepwall:

ya I will probably go with carpet and yes, I will most definitely be tinting the windows. Thanks for your input!

carpet takes off deee beeez

[Bob345 39]

I always liked carpet.

Paint can be so shiny !

I hope you planned some window tint ? Be careful:peepwall:

ya I will probably go with carpet and yes, I will most definitely be tinting the windows. Thanks for your input!

carpet takes off deee beeez

I'm guna actualy be doing beadliner, seems like it would last longer

[Bob345 39]

Ok, so now it's frontstage time. I originaly was going to try and put my own set of drivers together but now think maby just going with available set would be better. What do you guys think of the bravox cs60k's, been seeing allot about them here lately. Or if you guys have any other suggestions

[manrossdamn 57]

Fi Q FTW!

I have mine done, just need to get some videos up

Good luck

[97T5WAGONPIMP 115]

good shit bet it sounds good

[97T5WAGONPIMP 115]

anything done to your wagon

[Bob345 39]

just installed my 1200 d today and i did a small hair trick!!!!!

vids tomorrow!!!! the q 18 moves a hell of a lot o air off 1000 watts. FTW!!!!!

Edited January 25, 2011 by Bobobass

[sefugi 166]

Bring on the vids!!!

[Bob345 39]

Bring on the vids!!!

Teh vids are done!!

and yes i need some damping. there in none right now.

http://www.youtube.com/watch?v=ZpTrUlYKCO4

http://www.youtube.com/watch?v=aSsQH0_bc1I

[Bob345 39]

finaly got to mounting the q with t nuts. way better than dry wall screws.

[Shogen 325]

Bring on the vids!!!

Teh vids are done!!

and yes i need some damping. there in none right now.

http://www.youtube.com/watch?v=aSsQH0_bc1I

LITTER BUG!!!... I hope you picked up that menu/pamphlet... lolz

Videos are nice... What is your voltage like when bumping?

[Shogen 325]

Also with t-nuts... how did you install them? Pilot hole smaller than the nut and hammer in? I just haven't decided on what to do about mounting my subwoofer... On my old box I am almost sure I had a leak and it was killing the sound... I kind of think the same thing is happening with my new enclosure... Looking for a more secure method..

[Bob345 39]

Bring on the vids!!!

Teh vids are done!!

and yes i need some damping. there in none right now.

http://www.youtube.com/watch?v=aSsQH0_bc1I

LITTER BUG!!!... I hope you picked up that menu/pamphlet... lolz

Videos are nice... What is your voltage like when bumping?

my voltage goes from 14.6 to 13.9 on this song. seems pretty decent for a stock electrical. and dont worry, i picked up the paper lol

lol dont wory i pi