What the RMS for the 12"mag and peak??

[krazie 0]

Just woundering the RMS for the 12" mag d2 and the peak also the RMS and Peak on the 15" would be nice to thanks

[Upstage Audio 0]

hey crazy its, Alter from CAF...i think they are still rated at 900RMS for both. I would say anywhere from 500RMS to 1200RMS, probably wouldn't run 1200RMS at it all day at high volumes though. I use a Concept CC-D1200 and run it at 800-1000RMS after the gains are dialed in. I've let it see close to 1300RMS from the amp and it just got louder.

[krazie 0]

hey crazy its, Alter from CAF...i think they are still rated at 900RMS  for both.  I would say anywhere from 500RMS to 1200RMS, probably wouldn't run 1200RMS at it all day at high volumes though.  I use a Concept CC-D1200 and run it at 800-1000RMS after the gains are dialed in.  I've let it see close to 1300RMS from the amp and it just got louder.

<{POST_SNAPBACK}>

heh cool thanks stupid me forgot to hit the refresh button and didnt realize any1 post'd im sposed to get those CDT's u sent on the 23rd along with my amps and my sub on the 26th so says tracking hey but do you know what kinda enclosure i should do... not to sure does ported rattle more than sealed and would it be over kill ofr my lil hatchback scion tc 2005 i mean if it is over kill i guess ill order another amp and sub soon to make it worse!!!

hopefully i shatter my windows then ill have an excuse to buy some plexi glass oh thanksf or your help on CAF

[Upstage Audio 0]

1.5-1.7cu ft sealed. This is enough for me and I drive a sedan. i would hate to see how much cabin gain you get with that hatch.

[krazie 0]

heh oh well just as long as i go deaf and get to destwoy my car at the same time it'll be fine look at it this way... ill have to buy a new car cuz mine will fall apart then ill have to buy some more CDT's from ya and some more subs for my next car lol

[Upstage Audio 0]

heh oh well just as long as i go deaf and get to destwoy my car at the same time it'll be fine look at it this way... ill have to buy a new car cuz mine will fall apart then ill have to buy some more CDT's from ya and some more subs for my next car lol

<{POST_SNAPBACK}>

didnt you just buy this one...you must be rich!!! You should just buy more speakers from me now!!! but you'll go deaf, i bet after you break it in for a day and then have some fun with it, you'll PM me about how loud it gets.

[Electrodynamic 2]

900 rms on the 12, 950 rms on the 15. We do not publish peak figures.

[krazie 0]

900 rms on the 12, 950 rms on the 15.  We do not publish peak figures.

<{POST_SNAPBACK}>

oh ok well can you email me or PM me if you think 2 twelve's can take about 1500w each... friend has a 3000w amp and wants some subs ^.^ thanks

[Tirefryr 1,742]

900 rms on the 12, 950 rms on the 15.  We do not publish peak figures.

oh ok well can you email me or PM me if you think 2 twelve's can take about 1500w each... friend has a 3000w amp and wants some subs ^.^ thanks

Personally, I feel if you are careful, they can take the power. Enclosure is going to be the determining factor. Be careful with the gain and the volume knob, and don't play full blast for extended periods of time. Also be aware that warranty doesn't cover fried coils. If the driver goes into thermal failure, it's your fault.

On a side note, 1.5K per driver is just unnnecessary. I'm running 250 watts to mine and a quick sit in my truck is enough to make your ears hurt.

What is the amp he will be using?

[krazie 0]

900 rms on the 12, 950 rms on the 15.

[Electrodynamic 2]

Like Ryan said, 1.5k is just un-neccessary...but you can do it if you want. We do not cover burnt coils, so turning it up full bore (if his amp can actually do 3k on his electrical system) for an hour at a time is not a good idea.

I'm putting 1.6k per driver in our demo car, but it's totally overkill. Just for demo purposes / showing off basically.

[krazie 0]

Like Ryan said, 1.5k is just un-neccessary...but you can do it if you want.  We do not cover burnt coils, so turning it up full bore (if his amp can actually do 3k on his electrical system) for an hour at a time is not a good idea.

I'm putting 1.6k per driver in our demo car, but it's totally overkill.  Just for demo purposes / showing off basically. 

<{POST_SNAPBACK}>

oh so then i should put like 2k a driver lol im joking hmmf alright ill tell him ^.^ but im not sure if his amp is a true 3000w and if it is that would be 1.5k per driver 100 less than u ... hmmf perhaps he can set it at like 1000w@4 ohms?? hopefully iy blows up in his face so i can laugh

[ss454 0]

Why would you want to laugh?

[Electrodynamic 2]

Glad to see I'm not the only one who was wondering why he'd want to laugh.

[Upstage Audio 0]

i think i might laugh if his face is like mine when something goes wrong....strangely calm yet on the verge of pyscho.

[80INCHES 0]

well when i get these subs...i getting one 12 and putting it in a bandpass tuned at 30hz....and i'm slapping a orion 2500d on it...i will wire the sub at 4ohms so the sub can get 1200watts...and the gains will be at the lowest setting

80

[krazie 0]

Why would you want to laugh?

<{POST_SNAPBACK}>

i like make things go boom boom hmmf maybe thats why i never actually fix the computers at work ^.^ i always cath em on-fire... must destwoy ^.^

[Upstage Audio 0]

Why would you want to laugh?

<{POST_SNAPBACK}>

i like make things go boom boom hmmf maybe thats why i never actually fix the computers at work ^.^ i always cath em on-fire... must destwoy ^.^

<{POST_SNAPBACK}>

^^^ hence your name...and the odd pic in your avatar....which cartoon is that from though, looks oddly familiar.

[krazie 0]

Why would you want to laugh?

<{POST_SNAPBACK}>

i like make things go boom boom hmmf maybe thats why i never actually fix the computers at work ^.^ i always cath em on-fire... must destwoy ^.^

<{POST_SNAPBACK}>

^^^ hence your name...and the odd pic in your avatar....which cartoon is that from though, looks oddly familiar.

<{POST_SNAPBACK}>

CRAZY FROG!!!!!