External port

[Hostility 0]

how do you guys figure out how long an external port needs to be? is there a website or program i can plug numbers into? im using the box calc. from "torres" and plugging in the external port numbers doesn't change tuning. please help, thanks

[Kanaworm$ 292]

External ports are going to be the same length as internal. Only thing your not doing is subtracting the port volume from the internal air space!

[sefugi 166]

If I remember correctly this post My Box Tuning Calculator Download - SSA Car Audio Forum has a download for a calc. that has input for external ports. Hope this helps and Good Luck!

[Hostility 0]

thats the calc. im using, but when you punch in any number for external port, it does nothing to change tuning.

[Hostility 0]

i just went to 12volt.com used there little calc. i came up with this. the box is 1.44 cubes, single 4" aero port, for 30 hz = 23" port, for 35hz = 16" port. does that sound about right?

also, when you cut the pipe for the port, the port should be measured from tip to tip of the flares correct, so for 16" port, that should be 16" from tip of flare to tip of flare correct?

Edited June 13, 2010 by Hostility

[KU40 173]

No, you only measure from the inside of the flair.

[Hostility 0]

where from inside of the flare through? just before it flares out?

[Kanaworm$ 292]

where from inside of the flare through? just before it flares out?

Yes

[Hostility 0]

ok thanks

[SeductiveSounds 0]

Go to PSP Inc. - Pacific Software Publishing

They have a calculator for flared ports