spl zx3 build log

[splzx3 0]

the car

some pic of the inside

my last zx3 had 22k miles on it =) (not bad for a 00)

just a motor shot

[splzx3 0]

alpine type r's (the old ones) dual 4 ohms

alpine cde-9852 with i-pod cable

the amps

speakers (pass. door)

rear

driver door (yes the power wire is right there) there is no way thur the fire wall

sub amp

speaker amp

[splzx3 0]

my dis. block (4 now)

the wires cleaned up a bit

the subs and amps

well i got some tym 4 me and i wanted 2 clean up my wires and other stuff here are some pics 4 u guys

and the rats nest lol

some pics of the stuff in my car (orion 500.1 and a 300.2)

alpine type r's 12"

orion 5x7's

and a ssl eq (it was free xD)

[splzx3 0]

this pis can tell u wut i wanted done

this was done in a rush and came out all shity wires holes 2 close 2 the amps

i did not like the plan wood look so i got some black paint and had fun

this tym i took my tym and got it all done right (wirein it all up)

i need a relay for my amps and eq

and i have 2 get some more 8g and that will be the same as the other wires

[splzx3 0]

here is some pics of how the wires are

and some amps pics

my amp rack something like steve did

there will be 6 more fans on the middle one

6x8 down to 6 1/2

my new 6 1/2 (planet audio big bang)

one of three four ch amp with a 6 1/2 and the cross over

my cross over size 2 my amp

[splzx3 0]

my sister oldest kid with my frame where my amps will be at

my box with flex-stone

me with the frame

amd just some random pics

my plan for (8) rx2400 did not go 2 plan ( no room) go im down to six of them

start of the new amp rack

2 fans in each "brace"

2 fan in each area

one of the 6 amps (w8in 2 get the others) (2 in each area)

volt meter (not done makein it look stock)

new head unit

[splzx3 0]

1 of the ground for the big 3

other

yellow top (for now)

just a random motor shot

the rx 2400

a idea for my doors

a must have tool

the 2 amp i have 2gether

[BanginGMC 23]

Good job, make sure to take videos

[splzx3 0]

missin 2 fans

had 2 take the seat out 2 run the speaker wire and rca and make the holes for my power and grounds (not done yet)

how the wires are ran (cant tell there is any xD)

here the power wire is goin 2 be at

30 feet of 1/0 black,15 feet of 1/0 red,50 feet of 16 g,7 feet of black and red 8 g

my dad tryed 2 use it 2 drill the holes

with my box in there

[splzx3 0]

2 of the 1/0 holes with some Bushing

here is all 6 holes from a top view

and the bottom

my bass knob (perfect fit i can put my seat where i need and still have room 4 it)

where my battery is restin at =(

well got 3/4 of my 1/0 ran 2 day and got some lil pain in the ass stuff done 2

this was last night's work

to days work

my spot 4 my amps 6" tall

just a lil under the top of the seat

Edited June 9, 2010 by splzx3

[splzx3 0]

where the xover might stay im not sure yet

my puppy watchin out when i work

a pic of my port lol

just a idea of the box

all the wood be useing

the bottom painted for the port

a pic of the port

the front and side of the box

just a pic of the box and the ass of my car lol

[splzx3 0]

a pic inside the port

on top of the port and inside the box

some pics for the work i did 2day

still need 2 get the last part of the paint done

got my 240 alt last night and had 2 w8 2 to it put in

so here is the lil pics i have

[splzx3 0]

i put the horn box back in and warped it up

how my amps are laid out till i get a other rx2400

and when 2 get a soda not more then 20 mins ago and sub stop working and i started 2 smell that evil smell

(note be4 u say i was cliping them...my gains are all the way down and when i did have them up i had tune the amp on a o scope)

idk if i have but a pic of the rear battery but here

(thanks enemy for the hook up :good:)

the 05 type r basket

and the new alt

[splzx3 0]

im done working on the system for now so i started 2 paint my rims

this is be4 i cleaned them

i did not get any pic of them cleaned (sorry)

here is them taped off

and the first coat of white

put the rim back on (dont need 2 piont out the paint...i know)

the new and old :yahoo:

some pic of the rim

[splzx3 0]

so i got some pics of the rim be4 and after a bath

i changed it up (i think it looks better this way)

got some tail light tint 2

be4

after 2 coats

some tym after drying

note the tdh xD

[splzx3 0]

ok i started doing my door pods

this was the idea 2 start with

then when 2 this

old tee 2 wrap it

how it sit with it hanging on the door

started 2 coat it

with my new fav top xD

still need 2 sand then put bondo (spelling) on it

speaker grill or no (the grill will be painted 2 match the inside of the car)

[splzx3 0]

so when 2 my first meca spl show

here are my lt meter runs (note this was my first tym doing this way)

run #1

run #2

run #3

i took 3th in my class (street 4)

sorry for all the posting this is off *****.com

and i wanted 2 bring it over here

[Mark LaFountain 1,054]

Little highlight real I took from the Tucson Show.

[splzx3 0]

i just just watch that lol

that show was bad ass and thanks for the demo

[Randal Johnson 544]

Awesome !!! great work !!!

[splzx3 0]

thanks

any one want 2 see video go to my youtube page

just look under 01zx3

[akrod2as 2]

it's "time" not "tym."

[splzx3 0]

sorry my ex got my 2 spell it like that

[sefugi 166]

Lookin' Good! Keep up the hard work, waitin' for more...

[j-roadtatts 1,129]

Way to crack it out.