Jump to content
Sign in to follow this  
mrbojang

Voltage drop question..

Recommended Posts

So lastnight I installed a digital volt meter in my dash, and today I noticed that when starting the car it reads around 14.5v, when not running it reads around 12.8v...However driving around a bit I see my voltage drop down to around 12.8v, not staying at 14.5v, even if I'm not pushing my subwoofers...

Is this normal? I assume it has something to do with the alternator?

Share this post


Link to post
Share on other sites

check for belt slipping, or ur alt and or batt might b bad.

Share this post


Link to post
Share on other sites

Did you calibrate the volt meter

Share this post


Link to post
Share on other sites

check for belt slipping, or ur alt and or batt might b bad.

It's a new battery so I doubt it's that.

Share this post


Link to post
Share on other sites

Did you calibrate the volt meter

I measured the volts at the wires before hooking it up, then I hooked it up and it read the same voltage. I assume that it's accurate?

Share this post


Link to post
Share on other sites

Thats pretty accurate did you get the power wire from your amp?

Share this post


Link to post
Share on other sites

Thats pretty accurate did you get the power wire from your amp?

I ran 3 wires from the back of my amp, 1 for positive, 1 for ground, and one for remote..going into the dash connected to the unit.

Share this post


Link to post
Share on other sites

check your + post.. make sure your tighted it well after adding your amp lead.

the second question would be.. is it 12.8 at a redlight? with it in drive and your foot on the break?

or is it 12.8 as your driving down the road or hwy?

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×