4 DP21 Wall Build

[rmzsuzuki89 61]

I'm thinking about doing two Powerbass 4xl 8" midbass (one in each door) on a SAX 125.2, and two sets of either the 2xl or 3xl components on a SAX 100.4.

[stevemead08 752]

Use latex gloves and rub talc powder on your arms. makes it hard for the glass to get into your pores.

[rmzsuzuki89 61]

Use latex gloves and rub talc powder on your arms. makes it hard for the glass to get into your pores.

I use gloves, I'll try the powder. Thanks for the tip.

[Aaron Clinton 2,372]

Keep up the great work and all the pictures.

[rmzsuzuki89 61]

Keep up the great work and all the pictures.

More coming in a couple seconds lol.

[rmzsuzuki89 61]

Getting started on the other side. Those white spots were messing with me. Their completely saturated, maybe just discolored or something lol.

My half inch thick Tupperware lol.

Gonna let that harden up a lil while I mow, then more layers of mat.

[rmzsuzuki89 61]

Got a layer of mat on. It went on smoother because I used a roller this time instead of a brush, worked quite well.

I'm almost out of resin, so I'll be done until I can get out and get some more. Maybe I'll do a lil work on the baffles and port or something.

[SPL_Man 20]

a whole lot of work & a truly AWESOME build man

today is the 1st time im seeing it & i will be tuning in daily to see how the progress comes along

:drink40:

Edited June 12, 2010 by SPL_Man

[rmzsuzuki89 61]

a whole lot of work & a truly AWESOME build man

today is the 1st time im seeing it & i will be tuning in daily to see how the progress comes along

:drink40:

Thanks man. Progress has been slow lately, and will be for the next couple days, but it will pics up a lil soon.

[rmzsuzuki89 61]

It's been a while since I've done any work, but I did get a lil done today before going kayak fishing.

Made life a lil easier.

Nice tight fit.

When I took this pic, I realized that I went a lil overboard with the glue lol.

Screwed

Circles for hole cutouts, decided to use a screw instead of a pensil for some reason lol.

I'll hopefully get a lil more done tomorrow after riding and before fishing again. Gotta get out and get some more fiberglass too.

[Kanaworm$ 292]

Great progress! Keep up the good work!

[j-roadtatts 1,129]

Comin' along nicely! Starting to look like a box.

[snail05 0]

my jealousy is rising........

[rmzsuzuki89 61]

Great progress! Keep up the good work!

Thanks

Comin' along nicely! Starting to look like a box.

Yep, slowly but surely, thanks.

my jealousy is rising........

Lol thanks.

[rmzsuzuki89 61]

Cutting out holes.

Edited June 13, 2010 by rmzsuzuki89

[rmzsuzuki89 61]

Another test fitting.

Sub ready for test fit.

Gonna get the rest of the layers for the driver side baffle cut today. Maybe work on the other baffle, we'll see.

[Duran 387]

Please brace the hell out of that baffle

[bassahaulic 155]

Please brace the hell out of that baffle

x218135

218135 = Brace lol

[Kanaworm$ 292]

Not a lot of material left on that baffle to attach that monster 21"!

[rmzsuzuki89 61]

Please brace the hell out of that baffle

Please brace the hell out of that baffle

x218135

218135 = Brace lol

The baffle will be 4.5" thick, and I'll probably do a 2x4 across the middle.

Not a lot of material left on that baffle to attach that monster 21"!

I know lol. The subs are gonna overlap onto the side walls, port walls, top, and bottom.

[rmzsuzuki89 61]

Rest of the layers cut, just gotta cut holes out. The jig saw overheated half way through the first hole, so I'll be finishing that tomorrow lol.

First two layers glued and screwed.

I may end up doing another .75" baffle/beauty panel all in one piece and mount the subs to that, then do a layer of .5" to recess the subs. Making the baffle thickness a total of 5".

[sefugi 166]

Poor little saw, Looks like the front is comin' together....

[rmzsuzuki89 61]

Poor little saw, Looks like the front is comin' together....

Haha ya, I hope it's ok though. And it's still coming right along.

I may not get much done today because I'm gonna wax the boat again. Need some fiberglass money lol.

[lordaoshi 1]

tuning into this project kinda late but still can't wait to see more, thumbs up for doin shit right the first time

[rmzsuzuki89 61]

tuning into this project kinda late but still can't wait to see more, thumbs up for doin shit right the first time

Thanks