2 12in DC Audio LVL4XLs & 1 Stetsom 7k

[Cthedinger 2]

http://www.youtube.com/watch?v=9jJNtluThQQ

http://www.youtube.com/watch?v=xY4SbBIEfjs

I am ordering a line driver this weekend, box will be moved to the trunk as soon as i can get some help.

Comment, subscribe, and please rate. Lots of videos too come!

Edited May 8, 2010 by Cthedinger

[thehawk93 2]

That's great 2 12's doing that much flexing is awesome....

[Cthedinger 2]

That's great 2 12's doing that much flexing is awesome....

Thanks

Right now there is maybe 1 volt if even that going threw the rca's just wait till I have 5+ volts going threw them and get my amp o-scoped!

[thehawk93 2]

What ohm are you running that amp at??? Does it not claim to do 9700 rms at 13.8 volts at 1 ohm???

[BanginGMC 23]

I agree that is a lot of flex for 12's

[Dan208 23]

Nasty flex.

[Cthedinger 2]

What ohm are you running that amp at??? Does it not claim to do 9700 rms at 13.8 volts at 1 ohm???

Its running at 1.4 ohms puts out 7k at 1 ohm. The two stetsom amps I have were the very first 2 too ever come to the US. They are bassically 2 2k6 bridged internally.

I agree that is a lot of flex for 12's

It will soon too be a lot more!

Nasty flex.

It is indeed.

[Randal Johnson 544]

awesome ...

[Cthedinger 2]

awesome ...

Thanks Line driver will be here Friday.

[shizzzon 461]

why r u getting a line driver for?

I ran 6 amps off the same preout and never used a line driver and did fine.

[Cthedinger 2]

why r u getting a line driver for?

I ran 6 amps off the same preout and never used a line driver and did fine.

Because right now I am using an LOC with less than a volt preout and when I bump it up to 5 or 6 I should gain or at least according to everyone I have talked to including Rusty.

[shizzzon 461]

Oh.. ok, i see what you're saying.

[Cthedinger 2]

Oh.. ok, i see what you're saying.

Yeah and that way I will be able to get the full power out of my amp with out the gain all the way up.

[catwalk7382 0]

Edited May 30, 2010 by denim