Question about different DCON subs

[oc_wicked 0]

ok so i ordered a DCON 12 single vc 4ohms about a month ago and it was the same as pictured on the website so i ordered another last friday and got it in like an hour ago and when i opened the box it only says SSA while the one i bought a month ago say SSA DCON on the dust cap. So my question is did i get the wrong speaker or did i get stuck with an older/newer model? i really like the one that say dcon on it. but i jus want to make sure that i got a recent model. thanks in advance for your answers!!!

[Aaron Clinton 2,372]

We don't have any inventory built up, so there are no old models. What happened, it seemed was an original dust cap was mistakenly put on the later Dcon. Email us: support "at" soundsolutionsaudio.com if you would like the red "Dcon" dust cap shipped out to you.

[oc_wicked 0]

We don't have any inventory built up, so there are no old models. What happened, it seemed was an original dust cap was mistakenly put on the later Dcon. Email us: support "at" soundsolutionsaudio.com if you would like the red "Dcon" dust cap shipped out to you.

I wouldnt have cared but i dont wanna have two different looking speakers. also how would this work would i have to send this one first then wait till the other one arrived or would ya'll send it out and i just ship it back when i receive the new one?? also let me say ya'll have the best products im in love with my DCON!!!! i have also bought two amps from yall... i have a sundown 100.4 and 125.2 that i bought within the last 5 months and i am so satisfied!!!!! thanks alot

SSA Customer for LIFE!!!!!!!

[polkfan 0]

How sound the Dcon 12? What box spec? how much power ?

I'm interrested by this woofer.

If you had a video, it will be better.

thanks

[oc_wicked 0]

How sound the Dcon 12? What box spec? how much power ?

I'm interrested by this woofer.

If you had a video, it will be better.

thanks

it sounds very nice im impressed by how good it sounds in such a small box!!!! i currently have it in a pre fab box that is probably not even a 1cubic feet. and i am running it on a

Sundown Audio SAX-100.4D with both front channels running my 6.5" components and the rear channels bridged into the DCON 12 svc 4ohms which it does 320rms as they say but i think its a lil more. I plan on building the box that they have plans for on their website wich im pretty sure im gonna be more impressed when i here it in a good box!!!

[TRP 42]

I am pretty sure they would just send you the dust cap, and then you would glue it in place. But i am not 100%.

[cheese20323 13]

yeah gluing a dustcap isn't hard.

[Aaron Clinton 2,372]

I am pretty sure they would just send you the dust cap, and then you would glue it in place. But i am not 100%.

Yes, just faster and less expensive to send out a new dustcap.

[oc_wicked 0]

yeah gluing a dustcap isn't hard.

haha how hard is it really to replace it?

[Duran 387]

Re-glue it on

[Kanaworm$ 292]

Yup not hard at all! Just take a razor knife and cut the old one off, clean all excess glue by gently scraping with razor knife and re-glue!

[oc_wicked 0]

Yup not hard at all! Just take a razor knife and cut the old one off, clean all excess glue by gently scraping with razor knife and re-glue!

yea I think I'll jus stick with what I got!! I don't wanna take any sharp objects to my new baby

[Kanaworm$ 292]

Yup not hard at all! Just take a razor knife and cut the old one off, clean all excess glue by gently scraping with razor knife and re-glue!

yea I think I'll jus stick with what I got!! I don't wanna take any sharp objects to my new baby

I hear you there! My 10" doesn't have the DCON logo either.

[nem 2,019]

Yup not hard at all! Just take a razor knife and cut the old one off, clean all excess glue by gently scraping with razor knife and re-glue!

yea I think I'll jus stick with what I got!! I don't wanna take any sharp objects to my new baby

It really is not hard at all. Just take your time removing the old dust cap.