Sub Displacement

[zZZzzzSnooze2nd 0]

I have the 12" SSA Xcon D1, What is the Displacement of this sub? I would guess it's 0.18 or 0.19cuft?

Take a look!! It's a work of Art...

[bigrank916 72]

Did you check the specs on the site? Im positive its there.

Nice breakdown there too. Cool pics.

[deernet 6]

Did you make those breakdown pics or find them on the website somewhere? If you made them, good job, they look great.

[zZZzzzSnooze2nd 0]

Did you make those breakdown pics or find them on the website somewhere? If you made them, good job, they look great.

Nope I didn't fined them, I Made it using Google SketchUp 7. I'm going to remake the hole thing, I forgotten a few things.

Edited April 12, 2010 by Snooze

[BanginGMC 23]

Displacement: 0.17 cu.ft.

http://www.soundsolutionsaudio.com/store/products/12%22-SSA-XCON-D1%7B47%7DD2.html

XCON 12D2/D1

3" wide, 4 layer, Aluminum coils

Push terminals

Pulp Fiber Cone

5 progressive spiders

Custom FEA optimized motor

Aluminum Shorting Ring

3" Anodized alum. former

Triple Sandwiched Leads

Hand crafted in USA

Wattage: 1750wRMS

Specifications:

12" SSA XCON D2

Re 3.7 Ohms (1.85 per coil wired in series)

Fs 32.4 Hz

Qms 5.24

Qes .39

Qts .37

Mms 222

Vas 35 l

Sd 480 cm^2

BL 20.65

SPL 86.7 1 W/1m

Xmax 31mm

Enclosure Recommendations:

Sealed: .9 - 1.25 cu.ft.

Sealed: 1.35 - 1.5 cu.ft. optimal

Ported: 1.75 - 2.25 cu.ft. @ 26-33hz

Ported: 2.5 - 2.75 cu.ft. @ 26-33hz opt.

Sub Outside Dia.: 12.500”

Cut Inside Dia.: 11.150”

Displacement: 0.17 cu.ft.

Edited April 12, 2010 by BanginGMC

[zZZzzzSnooze2nd 0]

12" SSA XCON D2

Re 3.7 Ohms (1.85 per coil wired in series)

Fs 32.4 Hz

Qms 5.24

Qes .39

Qts .37

Mms 222

Vas 35 l

Sd 480 cm^2

BL 20.65

SPL 86.7 1 W/1m

Xmax 31mm

Enclosure Recommendations:

Sealed: .9 - 1.25 cu.ft.

Sealed: 1.35 - 1.5 cu.ft. optimal

Ported: 1.75 - 2.25 cu.ft. @ 26-33hz

Ported: 2.5 - 2.75 cu.ft. @ 26-33hz opt.

Sub Outside Dia.: 12.500”

Cut Inside Dia.: 11.150”

Displacement: 0.17 cu.ft.

ok, BTY the Sub Outside Dia is 12.750” with Rubber seal on.

Edited April 12, 2010 by Snooze