best way to clean a basket for a recone

[billystorms24 1]

hey guys i was wondering whats the best way to get the ca glue off the basket im using a chisel its worling but making a lot of nicks let me know guys thanks, billy

[billystorms24 1]

anybody at all have tips?

[lithium 358]

maybe dremel? (sp?) or sand paper

drill bit with wire bush attachment

steel wool

lots of stuff out there that might work

[Third Eye Vision 0]

yeah theres a few things id try before a hammer and chisel, i could see that doin some damage. i saw a guy do it with a drill and an abrasive pad like lithium suggested

[mlstrass 1]

turn the chisel upside down so the angled part rides along the surface of the basket. Then a sanding roll on a die grinder or dremel to clean it up...

[Julian 641]

drill with brush wheel, sand paper, and a little bit of elbow grease

[Duran 387]

As said above, a wire brush is the best for removing CA as well as preparing the surface for more glue.