BanginGMC's Build Log | The Rebuild

[jcarter1885 995]

It depends on the pre-out voltage of your headunit, if it is too high and whether or not it is clean or dirty power.

[BanginGMC 23]

Pre-out 2.0V @ 600Ω

http://www.kenwoodus...iver/KDC-MP345U

So set it at 2V no doubt?

[j-roadtatts 1,129]

It depends on the pre-out voltage of your headunit, if it is too high and whether or not it is clean or dirty power.

If they still sounded good at 3/4 gain then run them there. The cleaner the signal, the better.

[j-roadtatts 1,129]

Gains on "NOM" (half)

Crossed at 110

Pre-out 2.0V @ 600Ω

http://www.kenwoodus...iver/KDC-MP345U

Have you tryed listening with the type-r's crossed lower. I would suggest 80 or 63 if you can, see what you think.

[BanginGMC 23]

Alright

MAN! Couple more weeks till i get my sub stage started, i've been going waiting

I have to sit down and talk to the designer about the blow though, i have to figure out how many drivers i can run in the bed.

How many 18's..

How many 15's..

**wish I can do the wall, cause it would be pressurized like a muh-pucker but too much work + passenger space**

If the new/bigger BTL comes out soon after I buy my drivers im going to myself to death lol

EDIT: I'm going to play with the settings later before the night starts, i'll see how they sound j.

At 110 the 6.5s make my rear view mirror vibrate a little, i seen it and was like aww shiittt

Edited May 9, 2010 by BanginGMC

[SpeakerBoy 64]

Alright

MAN! Couple more weeks till i get my sub stage started, i've been going waiting

I have to sit down and talk to the designer about the blow though, i have to figure out how many drivers i can run in the bed.

How many 18's..

How many 15's..

**wish I can do the wall, cause it would be pressurized like a muh-pucker but too much work + passenger space**

If the new/bigger BTL comes out soon after I buy my drivers im going to myself to death lol

EDIT: I'm going to play with the settings later before the night starts, i'll see how they sound j.

At 110 the 6.5s make my rear view mirror vibrate a little, i seen it and was like aww shiittt

Got that minithump goin

[BanginGMC 23]

Alright

MAN! Couple more weeks till i get my sub stage started, i've been going waiting

I have to sit down and talk to the designer about the blow though, i have to figure out how many drivers i can run in the bed.

How many 18's..

How many 15's..

**wish I can do the wall, cause it would be pressurized like a muh-pucker but too much work + passenger space**

If the new/bigger BTL comes out soon after I buy my drivers im going to myself to death lol

EDIT: I'm going to play with the settings later before the night starts, i'll see how they sound j.

At 110 the 6.5s make my rear view mirror vibrate a little, i seen it and was like aww shiittt

Got that minithump goin

haha yeeaahh booyy!

[Julian 641]

Im curious to how much you paid for your paint job.

i love the paint.

[BanginGMC 23]

The truck was taken off the frame painted, it was more then 5k and less then 8k

[BanginGMC 23]

Okay, wellll... i'm seriously considering ditching the BTLs and getting the AA SMDs ( 18" of course. )

Everyone will find out very soon.

[ssh 924]

Okay, wellll... i'm seriously considering ditching the BTLs and getting the AA SMDs ( 18" of course. )

Everyone will find out very soon.

For some weird reason, I have a feeling you got the smds

[BanginGMC 23]

Okay, wellll... i'm seriously considering ditching the BTLs and getting the AA SMDs ( 18" of course. )

Everyone will find out very soon.

For some weird reason, I have a feeling you got the smds

[Mac N Cheese 90]

Okay, wellll... i'm seriously considering ditching the BTLs and getting the AA SMDs ( 18" of course. )

Everyone will find out very soon.

DC LVL 6's

[The enD 467]

Lol 162 posts and just pictures of a front stage.

Looks good though. :)

[BanginGMC 23]

Lol 162 posts and just pictures of a front stage.

Looks good though. :)

Yeah i knoww, but hey... they are some sexy fuckin' pictures haha.

More equipment coming soon.

[sefugi 166]

If you setup a sub stage like your front stage it will def. rock, you got me thinking of Type R's for my next front stage. Got some stuff waiting for my project when I finish my son's. Keep up the good work!

[BanginGMC 23]

If you setup a sub stage like your front stage it will def. rock, you got me thinking of Type R's for my next front stage. Got some stuff waiting for my project when I finish my son's. Keep up the good work!

Thanks for the kind words dude!

I would recommend Type R's to anyone

[BanginGMC 23]

So i contacted DC Power today and Mechman, I don't have many options.. but I did narrow it down to these.

Mechman -- 250amp ( 145 idle )

DC Power -- 320amp ( 130-140 idle )

Here I come DC Power

Sorry for the slow progress guys

[j-roadtatts 1,129]

So i contacted DC Power today and Mechman, I don't have many options.. but I did narrow it down to these.

Mechman -- 250amp ( 145 idle )

DC Power -- 320amp ( 130-140 idle )

Here I come DC Power

Sorry for the slow progress guys

DC Power FTW Baby!!! No need to apologize for taking your time, takes the smart way to do things.

BTW glad you like the Type Rrrrrrrrrrrr's (like a pirate,hehe) I am going to install my pair in my new truck soon. (build log fosho)

[BanginGMC 23]

So i contacted DC Power today and Mechman, I don't have many options.. but I did narrow it down to these.

Mechman -- 250amp ( 145 idle )

DC Power -- 320amp ( 130-140 idle )

Here I come DC Power

Sorry for the slow progress guys

DC Power FTW Baby!!! No need to apologize for taking your time, takes the smart way to do things.

BTW glad you like the Type Rrrrrrrrrrrr's (like a pirate,hehe) I am going to install my pair in my new truck soon. (build log fosho)

Yeah, i can't wait to get the Alt

It should make a hell of a difference with compared to my 75amp stock alt haha

[Dan208 23]

Looks good. I really like the paint job.

[BanginGMC 23]

....get ready.

[cheese20323 13]

18 pages for just a front stage? really wanting new pics yo..........

[BanginGMC 23]

18 pages for just a front stage? really wanting new pics yo..........

Takes time when each subwoofer cost about 800 bucks.......

Pictures will come when the equipment comes, AA is backed up with orders and it takes 5 days just for the order to process.

[cheese20323 13]

I know it does i have a feeeling this is going to be a great build just being a little sarcastic........LOL.