Enclosure Odd

[keetykush 34]

I usually am used to seeing boxes with the shape of a port like a L, but the box was to be tuned to 32 hz and is missing the piece of wood that is found behind the cutout usually... what is wrong here?

[stevemead08 752]

pics?

[///M5 2,833]

real description?

[Kanaworm$ 292]

Confucius say post pics!

[keetykush 34]

The port wall is missing.

[BanginGMC 23]

Are you saying it is suppose to be like L but is like l ? or is it like _ and is suppose to be like this L?

we need pictures to fully grasp what you are saying.

Edited March 19, 2010 by BanginGMC

[slim2fattycake 85]

x2 on all three lol.

[keetykush 34]

No pics for tonight but it goes like l instead of the typical L I''m used to seeing.

[Kanaworm$ 292]

Nothing out of the ordinary other than it's in the design and desired tuning frequency.

[NB50 206]

The port doesn't have to be an L shape. It can be an " I " if that is all the length needed to get the tune you need.

[altoncustomtech 773]

^^^^^ This exactly

[BanginGMC 23]

Try typing the specs in the calc and see if the tunning is to 32hz. RE Enclosure Calculator

[Kanaworm$ 292]

^^^^ Not the most accurate enclosure design.

[BanginGMC 23]

^^^^ Not the most accurate enclosure design.

I know, but it will be close enough for him.

- I PMed ya.

[keetykush 34]

Used the calculator, and my box looks nothing close to 32hz.

[keetykush 34]

The box isn't really big enough for the lack of a L and just being l shaped port, due to the box being so small

[keetykush 34]

The box isn't really big enough for a straight port...maybe I'm wrong.... I thought tune would have been off.

[Duran 387]

I don't think your understanding, if the vent is long enough to achieve tuning without having a bend it will be straight. The ONLY time there is a bend in a vent is when there isn't enough room available to achieve tuning.

[Impious 1,476]

Instead of wasting time using letters to describe the shape you think the port should be, how about you tell us the actual dimensions of your enclosure and the dimension of the port? That way we can calculate the actual enclosure volume and tuning of your enclosure.

Seems a little more productive, don't you think?

[BanginGMC 23]