2001 Chevy Extreme Blazer

[Kanaworm$ 292]

Had a major falling out with this so called friend and will not be working on it again!

Edited March 26, 2010 by OldSkool_08

[ABXX49 20]

Looks nice!

[BanginGMC 23]

Looks great!

I have yet to seen that type of terminal for the speaker wire outside the box, very impressed. Can you elaborate a little about it?

Also that bed liner looks amazing, where'd you but it? - or did you have to take it into a shop

[tyoung515 7]

nice build man, very clean. so on the bolts are you using brass?

[Kanaworm$ 292]

Looks great!

I have yet to seen that type of terminal for the speaker wire outside the box, very impressed. Can you elaborate a little about it?

Also that bed liner looks amazing, where'd you but it? - or did you have to take it into a shop

On the brass bolts the woofers are Dual 2 voice coils and wired separately to each bolt in a + - config. A lot easier to install and wire this way. Each bolt has a brass washer inside and out and 3 bolts each inside and out. Will never vibrate loose.

Bed liner was bought at Menards and put on with a roller. Great durable stuff with no smell at all. But we let it cure for 5 days or so.

[Mark LaFountain 1,054]

nice and clean, good work

[SIC Noma 2]

Very clean build...

[Notorious on mobile 0]

Wow !

Looks good !

[Kanaworm$ 292]

nice build man, very clean. so on the bolts are you using brass?

Yes they are brass!

[Sir-Lancelot 216]

Looks nice!

I like the red.

[djphilly 11]

beautiful box man. great job!!

[j-roadtatts 1,129]

Good looking work Brother.

[BanginGMC 23]

Why did you decide to add that piece of wood to the port? - so it becomes split.

[abmoore 8]

That herculiner looks really sick. Like the port too.

[Kanaworm$ 292]

Port bracing as the port is 10" wide. Even though the whole box is double baffeled just didn't want to take any chances.

[Kanaworm$ 292]

Thanks for all the comments guys, it's really appreciated.

[BanginGMC 23]

Port bracing as the port is 10" wide. Even though the whole box is double baffeled just didn't want to take any chances.

So it wasn't to change the air flow? - would that come into effect when considering the air flow?

[Kanaworm$ 292]

Doesn't restrict airflow imo. Just need to account for it's displacement.

[BanginGMC 23]

How much does a piece of wood like that take up? - can't be much

[Kanaworm$ 292]

To be honest not much at all. Would hardly change a thing.

[BanginGMC 23]

That's what i thought. i'm still a little confused about your terminals though.. im going to PM you so i dont clog up your thread. - that cool?

[Kanaworm$ 292]

Fire away!