Fi SSD (High Qts)

[Ginobli07 0]

I've been trying to figure out some theoretical expectations from a few subs using Winisd. I want to use a sealed enclosure, but I can't figure anything out with the SSD (12 inch Dual 2 ohm) until I know the higher qts. Does anyone know what it is? Hopefully I'm not being dumb and just can't find it. I know the Qts is figure by using the Qes and Qms numbers, so which ever changed would be helpful too.

[NDMstang65 403]

If you want to use a sealed box with the new SSD 12 then choose the high qts model and follow the box guidelines in the tech section...

Right off the top of my head..I don't know what it is.

[dimpthepimp 0]

If you want to use a sealed box with the new SSD 12 then choose the high qts model and follow the box guidelines in the tech section...

Right off the top of my head..I don't know what it is.

this might be also a dumb question. but is the high qts option able to be used in a ported box? or is this a no no? like the guy previous said there reall isn't any info on this.

thx

[Impious 1,476]

If you want to use a sealed box with the new SSD 12 then choose the high qts model and follow the box guidelines in the tech section...

Right off the top of my head..I don't know what it is.

this might be also a dumb question. but is the high qts option able to be used in a ported box? or is this a no no? like the guy previous said there reall isn't any info on this.

thx

It's a no-no.

If you want to use a ported enclosure, use the normal driver.

Don't put the High Qts driver in a ported enclosure.

[ssh 924]

If you want to use a sealed box with the new SSD 12 then choose the high qts model and follow the box guidelines in the tech section...

Right off the top of my head..I don't know what it is.

this might be also a dumb question. but is the high qts option able to be used in a ported box? or is this a no no? like the guy previous said there reall isn't any info on this.

thx

What Is High Qts

[ssh 924]

If you want to use a sealed box with the new SSD 12 then choose the high qts model and follow the box guidelines in the tech section...

Right off the top of my head..I don't know what it is.

this might be also a dumb question. but is the high qts option able to be used in a ported box? or is this a no no? like the guy previous said there reall isn't any info on this.

thx

It's a no-no.

If you want to use a ported enclosure, use the normal driver.

Don't put the High Qts driver in a ported enclosure.

Speak of the devil.

[Fi Car Audio 64]

Standard driver can be used ported or sealed. High Qts is better for sealed only applications.