question about the BIG 3

[thizzkid 0]

Just wondering, when connecting from engine block to chassis ground, can I mount from the air compressor bolt to chassis ground? the air compressor is all metal, so i assume its grounded, since it lays on top of the engine.

thanks in advance

[Kanaworm$ 292]

I used the alternator mounting bolt for mine.

[CrazyKenKid 64]

I used the alternator mounting bolt for mine.

x2 same here

[thizzkid 0]

so will using the air compressor be as effective as the alternator, or even a effective at all?

[Kanaworm$ 292]

so will using the air compressor be as effective as the alternator, or even a effective at all?

Could you post a pic of said compressor?

[jcarter1885 995]

Pretty much almost any bolt that is somehow attached to your engine will do as long as if you remove it nothing ill will come of it.

[Mac N Cheese 90]

Pretty much almost any bolt that is somehow attached to your engine will do as long as if you remove it nothing ill will come of it.

correct. also make sure it's sanded down bare

[thizzkid 0]

great, my chassis ground is all metal no paint on it, my car is a 95' ford explorer btw.

thanks guys for the feed back

[thizzkid 0]

and in case your wondering, this is my air compressor, you cant see my alternator, since its on the other side of the engine block. You cant see the bolt on the pic, but its a little below the pic

Edited March 12, 2010 by thizzkid