GAHHHH!!!

[CBFryman 2]

ive never even helped installing a security system before...led alone one this complicated.

I have a pheonix digital (i know) PD-175. The only major problems i could find with this was the rem starter. and i have a manual so i dont give a rats ass about that chit.

Now i have manual locks. so it obviously isnt going to be controlling my locks. however its talking about the door pin trigger? WTF? im geussing this is the wire that knows when a door has been opened to send that current to a relay to turn on the dome light. there was a thing on here about getting a CD instalation help guide thing and i asked but never got one. oh well. maybe you guys can help me. im looking around on the 12 volt to find out if i have a positive or negative trigger. but can anyone tell me where i can find this trigger? also. how does this siren connect.

from the diagram all i can geuss is i splice the red from the siren into the purple from the control module and then ground the siren? i geuss it already has the circut built into it to determine the pitch/what it says?

and if this is the case, eventually id like to get a pair of these pain inducers. could i just send the purple to a relay and then run the siren and the pain inducers off of the relay?

also, where am i going to mount this? inside the cab or in the engine compartment. id rather have to run the least ammount of wires i can. 1 drill throuhgt the firewall and 1 grommet maximum if i can (hopefully only for thedoor trigger)

really i dont think i need the door trigger. the module sets up to where if you dont open the door with in 40sec it tries to relock your doors. but since it isnt going to lock my doors because i dont have power locks that doesnt really help me.

except for that i assume it rearms the system as wel land is going to go off in 40sec after i startthe car and its going to tell me there was an illegal start or some BS. of course it isnt even being wired into my iggnition but the alarm/horn/lights should be going crazy because it will sence the vibration form the engine and the Gforces from the movement. and i will look stupid driving a vehicle with the alarm going off

so any help would be greatly appreciated. i tried taking pictures of the wireing diagram but i just cant get it clear so i will draw it up in paint as best i can and post it asap. i would be asking this on the 12 volt but they pay no mind to me and thoes froms move so damn fast.

[CBFryman 2]

here paint owns me 4 evah

the onlything this doesnt include is the to ocmmunication module (easy enough, plug and mount) and starter bypass, window roll up (dont care) and hood switch (green/black, Brown/black, and blue/black respectively if it matters)

http://i11.photobucket.com/albums/a167/CBF...eingdiagram.bmp

[Supa_c 1]

make it smaller please....

[CBFryman 2]

goddamn....photobucket makes the images too small. on my computer it was like 1000 pixles by 1000 pixles...