Enclosure design and blueprints

[TechSys 3]

I was wondering if you offer enclosure blueprints? I can build just about anyhting, just can't design worth a crap for some reason. If you do, here is what I got and need:

Vehicle: 1989 Chevy Astro cargo van

Subs: 4 SoundStream SPLX-154 quad 1ohm 15" subs

HxWxL available for enclosure: Well, pretty much a wall, but. 46" high x 48" wide x up to 60" deep (doubt I'll ever need a box that deep unless I go with a tunnel).

Power to subs: SoundStream XXX-6500d at 1ohm on 16volts.

Tuning: 35 to 37Hz.

What used for: Bass Race 140-149.9 or higher class as well as daily driver.

Design does not have to be extravagant just get loud, look decent, and sound good.

I pretty much like the design you already have sketchuped for the quad havoc 15 enclosure. That's kind of the design I want to go with, port in center. SoundStream says 3 ft^3 per sub with an F3 of 45Hz, tuned to 34Hz. The sub specs are:

RMS Power (Watts): 1000

VOICE COIL DIAMETER (INCHES): 3

VOICE COIL IMPEDANCE (INCHES): Quad 1ohm

WOOFER DISPLACEMENT (FT3): .13

MAGNET WEIGHT (oz): 192oz

FREQUENCY RESPONSE (Hz): 20-300Hz

Fs (Hz): 34Hz

Qes: .388

Qms: 5.041

Qts: .360

Vas (Ft3): 2.31

Xmax (in.): .565

SPL (dB): 90

HOLE SIZE (INCHES): 14.25

WOOFER DEPTH (INCHES): 8.125

Thanks. hopefully we can work something out

[Quentin Jarrell 671]

give me a day or two and I will draw something up for you. Do you need a cut list also?

[TechSys 3]

give me a day or two and I will draw something up for you. Do you need a cut list also?

Don't really need a cut list, but if you want to do one, go ahead.

And thanks.

[TechSys 3]

Just checking to see if any update on this or not? Not trying to rush you, just want to get started on the redesign of my wall.