Box for a 15" DP help

[wof131s 10]

Am trying to find out if a box that is 3.75 cu.ft net vol. with 64.5 sq.in of port be to small for this sub. I was considering buying a DP over a DR and needed to know. If it is them ill go with a DR in the same box. Am looking for mostly authoritive low-end bass, the box will be tuned to 30~32 Hz. How does this sound for what am looking for? Any input will be helpful.

Thanks

Edited February 22, 2010 by wof131s

[jcarter1885 995]

Did you give this a look at?

http://www.soundsolutionsaudio.com/forum/IA-Recommended-Enclosure-Sizing-t28822.html

I dont see why that box wont work for either one, what amp will be on this sub?

[wof131s 10]

Did you give this a look at?

http://www.soundsolu...ing-t28822.html

I dont see why that box wont work for either one, what amp will be on this sub?

Yes i did. I was just wanting to know if i would be able to get the low end extension with a slightly smaller enclosure than the average size enclosure that i saw on the IA site. Im using the AQ 2200D amp, but will set the gains so that it put out around 1800 watts. How does this sound?

[iamamp3pimp 34]

with that much port, it'll have to be a pretty large enclosure.

what type of power are you running?

[wof131s 10]

I am using an AQ 2200 amp. With that size box what size enclosure would you recommend? I could probably do a 4 cu.ft but the port would be like 2~3 inches from the side wall of the truck. I was thinking that this would take away from the sound and cause port noise.

Edited February 24, 2010 by wof131s