Mac N Cheese's build log

[Mac N Cheese 90]

INSTALLED!!!

15.1v at idle.....full tilt doesn't drop below 14v

now thats an alternator

more pics to come...to bad the alt. is absolutely hidden so you can't see the beauty....but i still gotta install a fuse holder and crimp the negitive line on the front bat.....

stay tuned

[BanginGMC 23]

[B7L|BL4Z3R 4]

INSTALLED!!!

15.1v at idle.....full tilt doesn't drop below 14v

now thats an alternator

more pics to come...to bad the alt. is absolutely hidden so you can't see the beauty....but i still gotta install a fuse holder and crimp the negitive line on the front bat.....

stay tuned

that text made me extremely jelous

[Mac N Cheese 90]

The madness is about to begin.....again, well not to much. Remember i am not looking for a all out SPL setup, just a daily driver that is light on weight and still bangs...a solid 12 BL in a 2.0 cu ft enclosure~35Hz

equipment:

12 BL dual 1

Alpine MRP M1000 (yes i know, no subsonic filter blah....it was stuffed away in my closet so i wanna give it some use)

Knu Konceptz 4awg Kolossus cable

Sundown 100.4 (JL 6.5s, tweets)

Still need another set of components for the rear.

Also my enclosure is temporary due to the fact i dont know if my new car rear seats fold down......if they dont i know there is a armrest that connects to trunk. Maybe aeroport straight forward.

Previous setup (BTL 18m, sundown 3k..etc)

12 BL brushed alum

feels good to go back to a 12....

tomorrow it will be tested out in my brother car...going against a W7

Found a type of car i am interested in but we will keep that a secret for now

[B7L|BL4Z3R 4]

ohhhh.. i know i know.. and those e8;s look good. NOW GET THEM RECONED

[Mac N Cheese 90]

ohhhh.. i know i know.. and those e8;s look good. NOW GET THEM RECONED

i am working on it...remind me never to do a flush mount again! i have been sanding the front baffle for a couple hours now and still the BL will not sit in straight.....out of sandpaper and dont feel like buying a router.

[Mac N Cheese 90]

Just waiting for shiz to finalize my enclosure and then it starts..

[sefugi 166]

Does that little fella think thats his new food bowl?

[Mac N Cheese 90]

Does that little fella think thats his new food bowl?

i am sure she would like that!

[Mac N Cheese 90]

picked up the necessary supplies from the local Lowes and ready to get started.

As of weather: high of 75, sunny with a breeze

Perfect!

[shizzzon 461]

6: Aero 18" long.

3.1cuft NET @33hz

Pay close attention-

The baffle, back and LEFT side are dual layered.

[Mac N Cheese 90]

got it, all three sides are doubled besides the port side

[shizzzon 461]

internal height is 16.5", external - 18" single layered port side, top and bottom

Keep port's flare edge about 3-5" from the back wall

[Mac N Cheese 90]

internal height is 16.5", external - 18" single layered port side, top and bottom

Keep port's flare edge about 3-5" from the back wall

will do. Thanks Shiz,

[Mac N Cheese 90]

waiting for glue to dry, then i will be adding fiberglass

[B7L|BL4Z3R 4]

i have your other clamp here

[Mac N Cheese 90]

i have your other clamp here

haha i was looking for it! its all good, I found some other stuff around the garage

[pdubb 5]

i like all your work, mac

[Mac N Cheese 90]

i like all your work, mac

thanks, i appreciate it...enclosure is finished.

Am i the only person to seal a BL before?

[Mac N Cheese 90]

i applied a couple layers of speckled gray spray and i like the look of it. I am sick of using black with white specks so i thought i would change it up a bit. Plus i thought it would look nice with a giant ass black aeroport coming out of the side. Paint still has to dry for another hour and then ill be putting in the terminals, predrill the screws in for the BL.

Almost completed in a single day

[Mac N Cheese 90]

heres the spray I used..

Bolt terminals

Thought i would do alittle touch up of black textured around the corners..

[B7L|BL4Z3R 4]

atta boy. when are you getting your car?

[Mac N Cheese 90]

atta boy. when are you getting your car?

i think i found THE one! and its a killer deal so im hoping to purchase it tomorrow...already called and left my number.

the icons on here will be going nuts if i purchase it

[B7L|BL4Z3R 4]

haha you will have to drive down and and show me..

[Mac N Cheese 90]

haha you will have to drive down and and show me..

ill be down that weekend!