Dual 15" BL Enclosure

[Cinnabun187 2]

I'm going atleast a 7cuft box tuned to somewhat 30-35hzt range. I'm building my own box and the subs aren't here yet. According to UPS the subs weigh in at 54lbs each. I'm simply asking if i should double baffle the box?

[Julian 641]

i would double baffle (or if you're using larger wood you can single baffle. for my bl i used 1inch) and also use allthread rods for support in the box, the BL's are pretty hefty woofers.

[Frostedflakejake 148]

its never a bad idea to double baffle. especially with 108 pounds on the baffle.

i would most definitely do the double baffle.

[Cinnabun187 2]

i would double baffle (or if you're using larger wood you can single baffle. for my bl i used 1inch) and also use allthread rods for support in the box, the BL's are pretty hefty woofers.

OK Cool thanks man I could only find 3/4 inch MDF between Lowes and Home Depot. Where did you find 1" MDF?

[Julian 641]

double layered 1/2 or double 3/4 works too.

you can go to lumbar yards and buy 1 inch from there too.

[antonmiller 8]

1" is custom ordered around here.

[Duran 387]

Double it and brace it.

[Cinnabun187 2]

Double it and brace it.

OK cool you said brace it as well cause I was damn sure going to flip a coin at it

[Duran 387]

Think of it this way, you'll never regret having too much bracing unless, simply put, your stupid and lose too much airspace. But you'll really regret it when your baffle breaks cause you didn't brace it.