Jump to content
sundownz

E8 v.2 Prototype

Recommended Posts

That poor little bastard!! LOL That is just crazy for a 200rms rated sub.

That just goes to show installation is everything ;)

Share this post


Link to post
Share on other sites

Install + a woofer that doesn't break :)

If there were any weaknesses in the driver this sort of thing would expose them quickly. Which is why we do it .

Share this post


Link to post
Share on other sites

SPL Testing in Sean's CRX -- Kick panel score @ 67 Hz.

CIMG3505.JPG

CIMG3506.JPG

CIMG3507.JPG

That was the most we could get -- the SA-8 has done 150.8 dB so far so this is a dB down from that.

Not too bad from the little guy!

How much power on it? That's a crazy score Jacob. Congrats on building a product that I will buy. Been looking for something for the Mustang, and this is it. Single 4 ohm version, I hope?

Kef

Share this post


Link to post
Share on other sites

Video of the score -- Sean got it uploaded... HD camera + awesome mic for the win :

Share this post


Link to post
Share on other sites

I have my big system pulled out of the Jeep pending the next setup... have this little guy in a small vented enclosure and it sounds GREAT. Bridged on the rear channels of a 100.4 for power.

I am really very pleased with it... I am happy with the output of just this one driver on more SQ oriented music. Honestly, I'd be pretty happy even on heavy material with a pair most of the time... VERY happy with it considering the power applied / enclosure size / cost.

Share this post


Link to post
Share on other sites

Would 2 of these work off of 125.2 ? Would the power be enough for them ? I'm looking for 2 8's just to fill the bass in the car, don't want anything extreme.

Share this post


Link to post
Share on other sites

Would 2 of these work off of 125.2 ? Would the power be enough for them ? I'm looking for 2 8's just to fill the bass in the car, don't want anything extreme.

Yep, plenty of power.

Share this post


Link to post
Share on other sites

then i'll be down for 2 for pre-order when you have it started.

What would be the coil that I would need for that amp ?

Share this post


Link to post
Share on other sites

toyopl, run each woofer on separate channels, at 2 ohms per channel and you will love them.

Share this post


Link to post
Share on other sites

Yeah, whatever you guys will reccomend that's what I'm gonna go with :D

Edited by toyopl

Share this post


Link to post
Share on other sites

SPECIFICATIONS:

D2

RE: 3.927 ohms

Fs: 43.59 Hz

Qes: 0.643

Qms: 4.404

Qts: 0.555

Le: 2.75 mH

Vas: 7.22 L

BL: 13.023 NA

Cms: 131 uM/N

Mms: 101 grams

Sens: 81.53 1w/1m

Xmax: 10.5mm one-way linear

Power: 200 RMS

D4

RE: 6.12 ohms

Fs: 44.7 Hz

Qes: 0.5456

Qms: 3.6545

Qts: 0.4748

Le: 4.02 mH

Vas: 7.26 L

BL: 17.45 NA

Cms: 131 uM/N

Mms: 96 grams

Sens: 82.59 1w/1m

Xmax: 10.5mm one-way linear

Power: 200 RMS

----

Measured D4 specs. I manipulated the winding width a little so the D4 actually ended up with slightly higher motor force than the D2 -- good stuff :)

Share this post


Link to post
Share on other sites

any news on timing on these ? is pre-sale starting anytime soon ?

Share this post


Link to post
Share on other sites

I would be interested once the price is said.. nice little sub to have.

Share this post


Link to post
Share on other sites

so is there going to be an E10 and E12

Share this post


Link to post
Share on other sites

I'd be up for them. :fing34:

Share this post


Link to post
Share on other sites

Man i wanna see these in somebodys door's as mid basses

Share this post


Link to post
Share on other sites

I was considering the REX 8s. What is the mounting depth on these? I'm sure its been stated, but I didn't see it. On the REX's its 4". I'm looking for something pretty shallow so that I can fit it in my door panels. Also interested in how these would compare. From the stated specs though I'm sure they would smoke the REX's, just don't know if I could work with the mounting depth.

Share this post


Link to post
Share on other sites

I was considering the REX 8s. What is the mounting depth on these? I'm sure its been stated, but I didn't see it. On the REX's its 4". I'm looking for something pretty shallow so that I can fit it in my door panels. Also interested in how these would compare. From the stated specs though I'm sure they would smoke the REX's, just don't know if I could work with the mounting depth.

These are 4.5" deep

Share this post


Link to post
Share on other sites

so is there going to be an E10 and E12

Eventually. I need to modify the motor a bit for 10s and 12s... it's on my to-do list.

Share this post


Link to post
Share on other sites

Good Because there should be budget subs for all the beginners....I think that is the reason people go mainstream because all brands from here don't have budget subs well some of them... But it would sell alot because not many people like alot of bass,others might just like a little... :peepwall:

Edited by cheese20323

Share this post


Link to post
Share on other sites

So... who is interested in these guys ?

Very interested. I just wonder if two would be enough. :peepwall:

Share this post


Link to post
Share on other sites

well to be honest the sa series is budget but the ev2 line will be less

Share this post


Link to post
Share on other sites

×