This is an odd one

[psycho72 1]

I am building a box in my wheel well. In the wheel well there is a small bracket that is where the spare tire is secured down. If I were to place a pipe in the middle of my box, to be used as a pass through where a long screw would go through to secure the box down. I would silicone it of course, I just want to know if there is any sort of petential problem music wise. See the attached for an idea of what i am talking about.

[Acidburn 10]

so you want to use the bar to hold the enclosure in place?

[Supa_c 1]

I am building a box in my wheel well. In the wheel well there is a small bracket that is where the spare tire is secured down. If I were to place a pipe in the middle of my box, to be used as a pass through where a long screw would go through to secure the box down. I would silicone it of course, I just want to know if there is any sort of petential problem music wise. See the attached for an idea of what i am talking about.

<{POST_SNAPBACK}>

No

SPL guys have really long bolts that they use for holding their enclosures totether.

Thet from end to end.

[psycho72 1]

Yes to acid and I may even add an American lock to piss of thieves.

to supa, I was actually wondering about the 2 1/2" diameter pipe that would house it as I don't want to have to reseal it everytime I remove the box. But that is exactly the bar I want to thread into the bracket. Just did'nt know if the pipe might act like a bell or somehting funky and create problems.

[UndercoverPunk 0]

no, it won't... just use PVC... it'll be easier to work with...

If I were you, to make things easier on yourself, I'd just have the pipe mount flush with the front and back of the box...

[Acidburn 10]

yep, just use PVC, if its airtight, it should be fine

[mrray13 30]

i third the pvc, but would suggest two things. one is to use pipe just large enough to allow the bolt to pass thru. second is to suggest that u wrap the pipe with deadner to eliminate (or close to it) the chance of resonance.

but otherwise, it sounds like a good idea.

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

[CBFryman 2]

No

SPL guys have really long bolts that they use for holding their enclosures totether.

Thet from end to end.

<{POST_SNAPBACK}>

its called thread rod, but you already knew that

[mrray13 30]

No

SPL guys have really long bolts that they use for holding their enclosures totether.

Thet from end to end.

its called thread rod, but you already knew that

it's actually called "all-thread", but u already knew that....

sorry, but i just had too...

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

[UndercoverPunk 0]

I was about to say the same thing till I saw your post mrray...

OWNED! On your birthday none the less...

[CBFryman 2]

tomarrow is my birthday...

all thread is the company...i geuss

at lowes "all thread, 5/8'' thread rod"

[CBFryman 2]

whoops, my mistake

ThreadED rod... damn

i love these

[Supa_c 1]

!!!

all thread/ threaded rod, same thing