IA6.4 Crossover question

[pimpedout97x 4]

On the IA6.4, if you leave the crossover selector to "full" does that mean you can set the low pass at a certain frequency, and the high pass at a certain frequency? or do the HPF and LPF adjusters not work when its set to play full range?

so example if i wanted a set of mids set to play 100hz to 5000hz, i could put the thing on full, then put the lpf to 100 and the hpf to 5k? (just an example)

Edited February 6, 2010 by pimpedout97x

[jcarter1885 995]

No it doesnt work like that, full range means it will play full range. Set your amp to Low Pass Filter at 5,000Hz and your subsonic filter to 100Hz, this way they will play anything from 5,000hz down to 100hz.

[noiseycricket 5]

Vj dont tell me ou bringing the tardedness here as well lmao

[///M5 2,833]

He's brought it here before, but obviously needed a real answer.

VJ full means no crossover 99.999% of the time.

[noiseycricket 5]

He's brought it here before, but obviously needed a real answer.

VJ full means no crossover 99.999% of the time.

i thought it was black and white, and he knows i have 2 of them and only a fone call away

[pimpedout97x 4]

hahah....well i didnt know thats why i posted it here

and shut up ant!

[noiseycricket 5]

lol u kno i roll deep in IA ova here u text and aim me for way less imp shizz so why not this feg... ur still my boy tho