J-Roadtatts Honda Accord Build

[j-roadtatts 1,129]

I got the 10" holes cut in the doors. A had to move the electric window motor alittle. I also rearranged the wiring harness.

The right door before removing the metal.....

heres the drivers door....

Here is where the electric window motor is originally......

This is a picture with the motor moved up about an inch and a half. The top circle shows where the bolt use to be.....

Heres the finished hole.....

As always I am SUPER BUSY with life so I am always happy to get a little more done. I hope to test fit the Aura's today. THEY are going to be one tight fit, I can tell already.

[j-roadtatts 1,129]

Here's a picture of my new front stage.

NOw thats a wicked front set-up. Hehe.

Here's some comparision pictures of the Type-r 6 1/2" mid and the Aura 10"mid.

the cone veiw.....

the motor veiw......

A side veiw.....

The Type-r is no slouch compared to most 6 1/2" drivers, but will never have the midbass of a 10". I am stoked.

[j-roadtatts 1,129]

I went to the upholstery shop and found another vinyl I think I will use this time. The color match better, but not the grain texture.

The small piece on the left is the last stuff I used, the piece in the middle is my a-pillar.

Here's the piece I cut off the door.

The old stuff has the same texture as the car and gives that three tone look. If I don't like the lighter stuff when I am, done I will switch back.

[Kanaworm$ 292]

Nice work! Very impressive front stage! Looking forward to more progress pics ....

[Duran 387]

Holy midbass Batman!

[j-roadtatts 1,129]

Holy midbass Batman!

thank you.

[jcarter1885 995]

Holy midbass Batman!

thank you.

, Holy Mid-bass Batman. I know Robin, I know

Hey that was my line Duran, take it back or

[Adrian_D 520]

You are a brave man for going with 10's in doors. It's going to be WILD

[mccleery3 166]

What gives bro? No pics ....LOL! I am really interested to see all this in and finalized

[j-roadtatts 1,129]

What gives bro? No pics ....LOL! I am really interested to see all this in and finalized

Other than cutting the holes in the doors, I haven't had the chance to do a whole lot, Because of the honey do list.

I just started working on them again this morning, SO progress pics probably today.

Also I am getting two door packs of Damplifier Pro from the brown santa any minute, which is the only other real hold up.

[Duran 387]

Holy midbass Batman!

thank you.

, Holy Mid-bass Batman. I know Robin, I know

Hey that was my line Duran, take it back or

[j-roadtatts 1,129]

I slowly am getting the pods done, heres a few pics.....

Some resin......

Here is the placement and aiming of the dash pods.....

As you can see THEY are both on-axis with the drivers seat, I think they should stage gOod.

Heres a pic of the back side of the baffle, I honed them out SO the driver could breathe.

[j-roadtatts 1,129]

Heres some pics of the dash pods wraped and resined.

as you can see the right one has a funny bump to cleaer the magnet. The motors are huge on these little guys.

[jcarter1885 995]

Keep working and no breaks

[j-roadtatts 1,129]

Keep working and no breaks

Its delicate, I can't neglect the wife and kids and other responsibilities. I squeeze in every minute I can without offending the W.

[jcarter1885 995]

You know im joking with you, just wanted to throw a few blows at you

[Adrian_D 520]

Yay for progress !

How big are the dash pods ?

[j-roadtatts 1,129]

Yay for progress !

How big are the dash pods ?

As small as I could possibly make them.

[j-roadtatts 1,129]

I got the PODs sanded and test fitted!!!! I took a shiiit load of pictures, SOOO STAY TUNED because I will be posting them when I get to work here in a few.

[Mac N Cheese 90]

I got the PODs sanded and test fitted!!!! I took a shiiit load of pictures, SOOO STAY TUNED because I will be posting them when I get to work here in a few.

[j-roadtatts 1,129]

the dash pods are about 8" x 4" x 4" with the slope following the windshield line.

this is a shot of the bottom sides....

you can see where the vent hole will be, this vents into the factory tweeter hole.....

heres the vent hole cut out.....

this is the right pod, because of the angle of the speaker, I had to form this bump imto the pod to clear the magnet....

NOW the test fitting.....

[mccleery3 166]

Moving right along bro This should look sick when it's all done

[jcarter1885 995]

I likey and cant wait to see the finished product

[j-roadtatts 1,129]

heres some progress pics of the door pods....

NOW the test fit....

I need to do one more layer of fabric and resin, then some body filler, then the vinyl!!!!!! Then I can install MY new drivers!!!!!!!!!!

[Mac N Cheese 90]

midbass right next to your fucking leg!hahah