Jump to content
Sign in to follow this  
bassahaulic

Having a hard time choosing.

Recommended Posts

I can either get a second SAZ-2000 or a single SAZ-3500. I am leaning more towards getting the second SAZ-2000 so I can have more power. But I like the thought of having a single powerful amp.

But on another note, I am VERY impressed with the 2000, it does more then rated power all day without getting more then luke warm. my SAX-100.4 gets warmer then the 2000 does.

These will be powering two RE MT 18"s

Share this post


Link to post
Share on other sites

Now that is a touch choice, your gonna have to let it boil down to a compromise either 500 watts more power or just one amp with less wiring. Which will you choose?

Share this post


Link to post
Share on other sites

Now that is a touch choice, your gonna have to let it boil down to a compromise either 500 watts more power or just one amp with less wiring. Which will you choose?

I would have to say it's more then a 500rms difference though, as in tests the 2000 did 2400 with mid 12's above 1ohm. I run mid 13's and wire below 1 ohm ;)

So I would call it almost a 1000rms difference.

Share this post


Link to post
Share on other sites

I doubt it is that big of a difference, have you ever tested a 3500D to even know what it is pulling to do a comparison (I would go with 500 watts give or take some). If your not competing then I would get the 3500D but if you are then just buy the second 2000D since you already have one of them.

Share this post


Link to post
Share on other sites

I doubt it is that big of a difference, have you ever tested a 3500D to even know what it is pulling to do a comparison (I would go with 500 watts give or take some). If your not competing then I would get the 3500D but if you are then just buy the second 2000D since you already have one of them.

Hmmm idk man lol

I do compete whenever there is a comp. I guess another 2000 will be what I do.

One more question, do I run .5 ohm per amp or .7ohm per amp?

Share this post


Link to post
Share on other sites

if you are asking wiring configs for 1 sub per amp, then dual 2s will be wired to 1 ohm which can read anywhere between - 0.65-0.9ohms

Share this post


Link to post
Share on other sites

I say upgrade to one 3500D and get another one in the future.

Share this post


Link to post
Share on other sites
Sign in to follow this  

×